Installing the batteries

Remove the battery cover from the remote control and put two AA size batteries inside the compartment.

The diagram inside the battery compartment shows the correct way to install the batteries.

Caution:

1.Keep batteries out of children’s reach.

2.Don’t attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the fire.

3.Always replace both batteries at the same time. Never mix new and old batteries or batteries of a different type.

4.If you don’t intend to use the remote controller for an extended period, remove the batteries to prevent possible leakage and corrosion.

5.Do not drop, apply shock or step on the remote control.

6.Do not spill water on the remote control.

Note: If the receiver does not operate when operating the remote control from a close range, you need to replace the batteries.

Using the Remote Control

1.To use the remote control, point it towards the front of the digital set top box.

2.The remote control has a range of up to 7 metres from the set top box at an angle of up to 60 degrees.

3.The remote control will not operate if its path is blocked.

Note: Sunlight or very bright light will decrease the sensitivity of the remote control.

7

Page 8
Image 8
Grundig GSTB3103HD manual Installing the batteries, Using the Remote Control