Grundig MFS 72-4610/8 TOP manual Basic functions

PIP		AV
				z
MENU				TOP
				MENU
				TV-G
				d
SCAN	PAT		S	P
DR		AUX		DVD

Tele Pilot 170 C

TELEVISION OPERATION ___________________

Basic functions

Switching on and off

1Switch on the television by pressing the »￿« button on the tele- vision set.

– The device switches to standby mode.

Switch the television on with »1…0« or »P+« or »P-«.

2Press the »￿« button to switch the television to standby mode. Press »1…0« or »P+« or »P-« to switch on the device from standby mode.

–After switching on, the station preset of the TV Guide provider is automatically selected. After a short time, the information about the current and upcoming broadcast is displayed.

3Completely switch the television off by pressing »￿« on the television set.

–This saves electricity.

Selecting channels

1Enter single-digit or multi-digit preset channel numbers by pressing »1 ... 0« on the remote control.

2Press »P+« or »P-« to move up and down channels.

Selecting AV channel positions

1Use »AV« to select AV channels directly.

Adjusting the volume

1Adjust the volume with »￿« or »￿«.

Muting

1Use »p« to switch the sound off (mute) and to switch it on again.

Call up TV Guide and time.

After switching the station presets, information about the current broadcast is displayed (TV Guide).

1Call up information about the current and next broadcast by pressing »TV-G«.

- The information and the time are briefly displayed.

Note:
If the message »No info« is displayed, switch to the channel
preset of the TV Guide provider by pressing »1…0« or »P+«
or »P-«. After a few minutes the new data will have been loa-	ENGLISH
ded.

13