ENGLISH
11

Audio settings

1Press »i« to open the »MENU«.
– The »MENU« appears.
2Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Note:
Further operation is explained in the following sections.

Volume

The standard volume is set here. This is the volume of the device
after switching on.
1Select »Volume« with »P+« or »P-« and adjust the setting with
»Ǹ« or »Ƿ«.

Balance

1Select »Balance« with »P+« or »P-« and adjust the setting with
»Ǹ« or »Ƿ«.

Stereo / two channel, mono

If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1Select »Sound type« with »P+« or »P-« and adjust the setting
with »Ǹ« or »Ƿ«.

Stereo width

Widens the audio output for stereo programmes and improves the
sound with mono reception.
1Select »Sound mode« with »P+« or »P-«.
2Press »Ǹ« or »Ƿ« to select the setting.
SETTINGS ______________________________________________
Sound
Volume
Balance
Sound type Stereo
Sound mode Normal
AVL Off
Dynamic Bass On
Equalizer
Headphone
●
FBack
●
iExit
MAIN MENU
Sound
Picture
Preset list
Channel settings
Settings
Select ●
iExit
ǵ
Sound
Volume
Balance
Sound type Stereo
Sound mode Normal
AVL Off
Dynamic Bass On
Equalizer
Headphone
●
FBack
●
iExit