I M P O R T A N T S A F E G U A R D S
IMPORTANT NOTE: To prevent the loss of clock and memory settings, always turn the radio off when installing or removing batteries and when plugging or unplugging the AC adaptor into or from the radio.
O P E R A T I O N G U I D E
HOW TO INSTALL BATTERIES
If the radio already has batteries in it, turn the radio off. Slide the battery com- partment cover 11 , on the bottom left, away from the radio until it opens. Install 2 AA alkaline batteries, following the diagram imprinted on the back of the radio near the battery compartment. The + side of each battery faces toward the battery compartment cover.
USING AN AC ADAPTOR (read the IMPORTANT NOTE, on page 6)
Turn the radio off. Plug the adaptor into an AC outlet, then into the radio's DC jack 20 . Before unplugging the AC adaptor, turn the radio off. Use only an AC adaptor with the following specifications: output, 3 VDC, negative polarity.
OPENING THE HINGED COVER
Open the hinged cover 12 by pulling on the latch (middle right side). The cover is hinged on the left side and opens to the left.
HOW TO TURN THE RADIO ON AND OFF
There are two ways to turn the radio on and off. Both are shown below: ON/OFF using the 'SLEEP' button 10 and 'OFF' button 14 and ON/OFF using the 'POWER/STANDBY' button 13 . The 'SLEEP' method only works if the clock is set.
ON/OFF USING THE 'SLEEP' AND 'OFF' BUTTONS
To turn it on, press the 'SLEEP' button 10 . To turn it off, press the 'OFF' button
14. When initially turned on, "60" will appear in the LCD for 5 seconds before the frequency display appears. Please note that the radio will automatically turn off after "60" minutes. This helps prevent batteries from running down if the radio is turned on accidentally. Turning the radio on in this manner is associated with the sleep timer function. See the section below titled HOW TO SET THE SLEEP TIMER page 11 for more details.
6 |
| 7 |