The Clock
•The timeout (period during which you must complete each entry) of approx. 60 seconds applies also for the clock.
•You can enter times whether the radio is switched on or off.
•You can enter clock times and switching times in several different ways.
Examples:
Clock time
1 st example: Clock time 6.30
2nd example: Clock time 15.00
3rd example: Clock time 0.15
Setting the Clock
(TIME I/Clock time I) with the help of a reference clock. Example TIME 1: 6.30 hours:
•The display must indicate TIME I.
•Enter the clock time with the numeric buttons.
•Press and hold down the TIME I/II button until the refer- ence clock jumps from 6.29.59 to 6.30.00.
-As soon as you release the TIME I/II button, the clock starts running right on the dot and the colon between the hours and the seconds indication will flash.
Setting the Clock
(TIME II/Clock time II).
For setting TIME II/Clock time II proceed in the some way, with the only difference that the display must indicate TIME II.
As the seconds of clock time II run synchronously with clock time I, you must not wait for the minutes
Clock Time Indication TIME I/II
•Repeated pressures on the TIME I/II button (without pre- ceding number entry) will switch between the two clock time indications.
24
