Grundig YB500 owner manual Power Supply, AC Mains Operation, Battery Operation, Battery Check

Power Supply

AC (Mains) Operation

•Only use the supplied AC (mains) unit NR 90-1 for the set.

•Adjust the local mains voltage on the AC (mains) unit.

220... 240V110... 127V

•Connect the mains unit to the DC IN 9 V socket(30)

(30). This automatically disconnects the inserted batteries.

-No responsibility can be accepted for damage due to operation with the voltage selector set to the wrong position.

•Remove the batteries if the unit is to be operated perma- nently on the mains!

Battery Operation

With four 1.5 V batteries, type IEC LR 6 or AA.

We recommend the use of alkaline-manganese batteries with low mercury constituent or no mercury at all.

•Disconnect the plug of the AC (mains) unit from the DC IN 9 V socket (30).

•Open the cover of the battery compartment (10)

(on back of unit).

•Insert the batteries with correct polarity

(see scheme on bottom of battery compartment).

•For this, observe the order of the batteries and the posi- tion of the take-out ribbon (see Fig. to the right)

Battery Check

When the batteries get weak, a battery symbol () will appear in the display (4).

7