Symptom

 

Checklist

Measure to Take

 

 

 

 

Vacuum cleaning

Check whether the power plug of

 

robot cannot find the

 

the charger is plugged correctly

 

charger.

 

into the outlet.

 

 

 

 

 

 

If there are any obstacles within a

 

 

 

range of about 1m in front of the

 

 

 

charger and about 0.5m range to

 

 

 

the left and right of the charger,

 

 

 

you should remove the obstacles.

 

 

 

 

 

 

If there are any foreign substances

 

 

 

on the change pin, wipe them off

 

 

 

with a dry towel.

 

 

 

 

 

 

Is the VIRTUAL GUARD installed

• Move the VIRTUAL GUARD to

 

 

near the charger?

another place so that the vacuum

 

 

 

cleaning robot can charge

 

 

 

automatically.

 

 

 

 

Vacuum cleaning

Are the batteries of the VIRTUAL

• Replace the batteries.

robot passes through

 

GUARD worn out?

(2 type D (LR20) alkaline batteries)

the VIRTUAL GUARD.

 

 

 

Is the lamp turned off?

• Check if the VIRTUAL GUARD

 

 

 

is turned off and then turn the

 

 

 

VIRTUAL GUARD on.

 

 

 

 

The battery usage

Are you using manganese drycell

• Replace the batteries with new

time of the VIRTUAL

 

batteries?

alkaline batteries.

GUARD is too short.

 

 

(2 type D (LR20) alkaline batteries)

 

 

 

 

The vacuum cleaning

The vacuum cleaning robot may

• The cleaning direction is

robot suddenly

 

clean in a diagonal direction in the

determined by the initial location.

performs its cleaning

 

following cases.

Since it cleans areas by drawing a

operation in the

-

After the vacuum cleaning robot

map, it eventually covers the entire

diagonal direction.

 

has been charged while placed at

area. (Normal operation)

 

 

an angle in the charger station.

Install the charging station in

 

-

When the vacuum cleaning robot

the direction of the grain of the

 

wood, and start cleaning while the

 

 

moves to another area by a

 

 

vacuum cleaning robot is docked

 

 

shortened route after cleaning an

 

 

with the charger station.

 

 

area.

 

 

 

 

-

When the angle of making

 

 

 

contact with an obstacle is not

 

 

 

perpendicular (90˚).

 

 

-

When the fl oor is made of tiles or

 

 

 

wood.

 

 

 

 

 

44_ troubleshooting

Page 140
Image 140
Samsung VR10F71UCBC/SW Charger, Virtual Guard, Battery usage, Time of the Virtual, Guard is too short, Robot suddenly