Samsung VR10F71UCBC/SW Auto Cleaning, Normal Mode, Turbo Mode Dust Sensor Mode Cleaning Complete

Auto Cleaning

The vacuum cleaning robot will move by itself and automatically clean the house until cleaning is completed once.

■ If you press the Start/Stop button on the main unit or remote control without selecting a cleaning mode, an automatic cleaning run starts.

■ If cleaning begins when the vacuum cleaning robot is docked with the charger station, the time to return to the charger is decreased since the vacuum cleaning robot remembers its original position while moving.

■ If the vacuum cleaning robot starts the current cleaning run at a location other than the charging station and fails to locate the charging station while cleaning, it will stop near the location where it started cleaning.

■If the battery level becomes too low while cleaning, the vacuum cleaning robot will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed : Once)

03 OPERATING

Main unit button	Remote control	Configuration
	button	Sequence
	1.	Set the mode.
▶
1time
	2.	Cancel the mode.

Normal Mode

About the Resume Cleaning function

•If the vacuum cleaning robot has evaluated that cleaning is complete, the resume cleaning function is not performed.

NOTE

•If you move the vacuum cleaning robot when it is being charged or press a button, the vacuum cleaning robot judges cleaning to be complete and does not resume cleaning.

•Do not move the vacuum cleaning robot when it is cleaning

CAUTION or press a button while it is cleaning. Otherwise, the vacuum cleaning robot judges cleaning to be complete and

starts cleaning again from the beginning.

•Each time you press the Turbo button, the Turbo icon on the display panel is turned on or off sequentially. When the Turbo icon is turned on, you can start cleaning in Turbo mode.

•Each time you press the Dust Sensor button, the Dust Sensor icon on the display panel is turned on or off sequentially. When the Dust Sensor icon is turned on, you can start cleaning in Dust Sensor mode.

Turbo Mode

Dust Sensor Mode

Cleaning Complete

operating _29