Samsung VR10F71UCBC/SW manual Repeat cleaning mode, Value you set blinks, Settings are completed

	Remote Control		Configuration Sequence
Blinks		4.	Press the Timer/Weekly
			button. Press the Y or Z
	Decrease	Increase
			button to set the cleaning
			mode.
Blinks		-	You can select either Auto or
			Repeat cleaning mode.
		5.	Press the Timer/Weekly
			button.
Blinks		-	The value you set blinks and
			the settings are completed.
		❈ After the settings are
			completed, the day of week
Blinks			you have set blinks. At this
			time you can move to step ( 2 )
			and add another day of the
			week.
	- If you press the Start/Stop button while you are making a
Canceling the Settings	weekly reservation, the reservation for the currently set day of
	the week is canceled. Then if you press the button again, the
	cleaner exits reservation setting mode.
Timeout	- If there is no input for 1 minute while setting the time, the
	cleaner exits the reservation setting mode automatically.

03 OPERATING

operating _35