![](/images/backgrounds/354021/354021-0123x1.png)
USING THE VACUUM CLEANING ROBOT
Starting/Stopping Cleaning
You can run or stop all vacuum cleaning robot functions.■Each vacuum cleaning robot function only runs when the Power Switch is turned on.
■When the vacuum cleaning robot is operating, press the button to cancel the operation and select a function.
OPERATING 03
- Main unit: Press the button.
- Remote control: Press the button.
- Main unit: Press and hold the button down for 3 seconds.
❈If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging. To turn the power on again, press and hold the power () button on the main body.
Using the remote
control
-Remote control : Press the Auto, Spot, Max, Manual button.
-Main unit : Select Auto, Spot, Max mode by using the button
and then pressing the button.
-When cleaning begins, the vacuum cleaning robot starts to move.
❈Pressing the button without selecting cleaning mode starts to
perform the Auto mode cleaning.
Stopping-To stop, press the remote control or main unit button.
-When cleaning is stopped, the vacuum cleaning robot stops.
Using the main unit
buttons
operating _27