JVC HR-J674EU Another Video Recorder, 32 EN, B Set the input mode of recording deck, EDITING cont

32 EN EDITING (cont.)

Edit To Or From

Another Video

Recorder

A
TV receiver		Player		Your recorder
		21-pin SCART cable
		(not provided)
Video	RF cable
channel or
AV mode	(provided)
			Another recorder
		Recorder
B
Recorder		Your recorder		TV receiver
21-pin SCART cable			RF cable		Video
			(provided)
(not provided)
					channel or
					AV mode
Another recorder
Player

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated.

AWhen using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/DECODER connector to the source player.

B Set the input mode of recording deck.

With this video recorder, press AUX (NUMBER key “0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the AV2 (L-2) IN/DECODER connector, make sure “L-2 SELECT” is set to “L-2” ( pg. 39).

C Set the edit mode.

See “PICTURE CONTROL” on page 37.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 37).