Safety Precautions | JVC HR-J674EU specification

2 EN	SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM- West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on page 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

PAL

●Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder, however, only VHS signals can be played back and recorded.

●HQ VHS is compatible with existing VHS equipment.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

JVC HR-J674EU instruction manual Safety Precautions

Contents

Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVs Connect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mains Select your country Auto Set UpTurn on the recorder Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or e Set the video channel Perform Preset Download10 EN Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Language Access the Main Menu screenAccess the Country Set screen 12 EN Attach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connections Setting satellite receivers brand and channel 14 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 16 EN Variable Speed Search Slow MotionHigh-Speed Search Pause during playback Instant ReView 18 ENManual Tracking Next Function Memory Index SearchSkip Search Repeat Playback 20 EN Watching Another Instant Timer Recording ITREngage the ITR mode Set the recording duration Tape Remaining Time Reset the counter22 EN Set the counter display Playback Recording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 24 EN Satellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number Set Express Timer Programming 26 EN Enter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR + 28 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screen Programme Recording Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode 30 EN Edit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorder 32 EN Set the input mode of recording deckAnother Video Recorder Start the source player Connecting To a Satellite Receiver Satellite receiver Decoder Back of recorder Connect the decoder Select the input mode34 EN Set the tuner HR-J670/671/672/673/674EU only Make connections Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 38 EN For Example About Ntsc Playback 40 EN Access the Auto Channel Set screenTuner Set Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 42 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 44 ENSet Stations a TV Station And ID List Station Name Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 46 EN Guide Program Number Showview SetupGuide Program Number Set Enter the Guide Program number 48 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operation Troubleshooting 50 EN Recording Other Problems 52 EN Playback 54 EN Language Manual Channel Set Manual Tracking Mode Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner Set See Instructions pg International Telephone Language CodeCountry Code