Check the contents, Situate the recorder | JVC HR-J674EU specification

INSTALLING YOUR NEW RECORDER

EN 7

Basic Connections

Aerial connector

Back of TV

TV aerial

21-pin SCARTcable connector

21-pin SCART	RF cable
cable	(provided)
(not provided)

Mains power cord

Back of

AV1 (L-1) IN/OUT

recorder

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need an optional 21-pin SCART cable in order to enjoy stereo playback of video tapes.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 54.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

●To connect to a TV with NO AV input connectors . . .

A Disconnect the TV aerial cable from the TV.

B Connect the TV aerial cable to the ANT. IN connector on the rear panel of the recorder.

C Connect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

●To connect to a TV with AV input connectors . . .

A Connect the aerial, recorder and TV as per “RF

CONNECTION”.

B Connect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 8.

Image 7

JVC HR-J674EU Check the contents, Situate the recorder, Connect the recorder to TV, Connect the recorder to mains

Contents

Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To Use Connect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TV Turn on the recorder Auto Set UpSelect your country Press rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language code Press rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channel Just Clock Language for the on-screen display 12 EN Access the Main Menu screenAccess the Country Set screen Language Make connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller 14 EN Setting satellite receivers brand and channel NexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 16 EN Basic Playback Pause during playback Slow MotionHigh-Speed Search Variable Speed Search Manual Tracking 18 ENInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory 20 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching Another Set the counter display Reset the counter22 EN Tape Remaining Time Recording Playback 24 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer Programming Guide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users 26 EN Express Timer Programming Press PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position 28 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify 30 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme Recording Start the camcorder Set the recorder’s input modeSet the edit mode Edit From a Camcorder Start the source player Set the input mode of recording deckAnother Video Recorder 32 EN Satellite receiver Decoder Back of recorder Connecting To a Satellite Receiver Set the tuner Select the input mode34 EN Connect the decoder Make connections HR-J670/671/672/673/674EU only Select the mode setting Mode SetAccess the Mode Set screen Select the mode Off, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer is For Example 38 EN About Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 EN View the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 42 EN Delete a Channel When Receiving a Scrambled Broadcast Set Stations a 44 ENSet Stations B Station Name TV Station And ID List 46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel Set Enter the Guide Program number Showview SetupGuide Program Number Set Guide Program Number Clock Set Access the Clock Set screen48 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data 50 EN Troubleshooting Recording 52 EN Other Problems Playback 54 EN Timer warning display Tuner Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Language Manual Channel Set Manual Tracking Mode Set Country Code International Telephone Language CodeSee Instructions pg