PowerPower Supplypply

Loading the Alkaline Batteries

[ Bottom View ]

Lock Button

Slide all the way to the end.

Note

When loading or unloading Batteries, be sure to slide the Battery Compartment lid all the way to the end before opening. If the lid is not slid to the end, Battery Loading and Unloading may be impossible.

1 While pressing the Lock Button, slide the Battery Compartment lid in the direction of the arrow and swing it open.

2 Install four Alkaline Batteries.

Be sure to use Alkaline Batteries. Never use manganese batteries.

Make sure that the positive (+) and (-) ends of the batteries are facing the

correct direction.

3 Swing the Battery Compartment lid down and slide it shut.

WARNING! Do not dispose of Battery in fire, put in backwards, disassemble, or short circuit; otherwise it may leak or burst, causing possible personal injury.

Battery Notes

Safety precautions:

Do not mix old and new batteries.

Do not mix alkaline with manganese batteries.

Do not get the AA alkaline batteries near, or dispose of in fire.

Do not directly connect (short circuit) the positive (+) and negative (–) terminals.

Never attempt to disassemble or

reassemble the Battery.

• Do not drop or jar the Battery.

Note

Instead of the supplied Alkaline batteries, you can also use AA type Ni-Cd (high density type) or nickel Metal-hydride batteries available on the market.

If you are not going to use the Digital Camera for an extended period of time, remove the batteries from the Digital Camera.

12

Operation Time

When using the supplied Panasonic

alkaline batteries, you will have a maximum of about 120 images* (at an ambient temperature of 25° C).

*Conditions :

Using the Panasonic Alkaline batteries.

Capturing an image every 30 seconds.

Using Flash once for every other capture.

Recording mode is Fine.

For assistance, please call : 1-800-272-7033.

3000.P12-14.p65

12

00/09/25, 10:37

Page 12
Image 12
Panasonic PV-DC3000 PowerPower Supplypply, Loading the Alkaline Batteries, Battery Notes, Operation Time