WORKING WITH MEMORY continued WORKING WITH MEMORY continued
MEMORY SEARCH
Memory Search enables searching through the memory pre-
sets within a memory page,as shown below:
1. Press/release the M.Scan/Page button.
2.Use quick, short presses on the + or – buttons to search
through the memory presets.
MEMORY AUTOSCAN
Memory Autoscan enables scanning through the memory pre-
sets within a memory page.The memory being scanned
enables listening to the station for about 5 seconds and will
then move on to the next memory automatically.Autoscan
will continue indefinitely on the selected page until deliber-
ately stopped.
1. Press/release the M.Scan/Page button.
2. Press/hold either the + or – button for about 3 seconds.
Then release it.Note that the memory preset number in
the upper right corner of the display flashes and the pre-
set being scanned remains for about 5 seconds.It then
moves on to the next memory preset for another 5 sec-
onds.To stop memory preset autoscan,press/release
either the + or – button.
35
ACCESSING WHAT IS STORED INTO MEMORY
Below,the three ways to access what has been stored into
memory are described:Direct Memory Access, Memory Search
and Memory Autoscan.When the memory page and memory
preset numbers appear in the upper right corner of the dis-
play,as it will in the sections below,the radio is in MEMORY
ACCESS MODE.This mode can be exited any time with a
press/release of the M.Scan/Page button.
DIRECT MEMORY ACCESS:To directly access a memory pre-
set,the page number and preset number must be entered, as
shown below:
1. Press/hold the M.Scan/Page button for about 3
seconds.Then release it.Note that the memory page is
flashing in the upper right corner of the display.
2. Within 5 seconds select the desired page with the + and
– buttons.
3. Within 5 seconds,use the numeric keypad to key-in the
memory preset number that you wish to access.(if it is
under 10,key in 01, 02, etc.). NOTE:Once a page number
has been selected or changed,even if it is not seen on the
screen,a memory preset on that page can be selected by
keying in the memory number with the numeric keypad,
without having to re-do steps 1 and 2 above.
34
YB 550PEOPERATION MANUAL