GSI Outdoors PNEG-1597 manual X 1 Square key Tooth sprocket Roller chain

3. Assembly

13.Assemble the 13 tooth sprocket to the motor shaft using square key (1/4" x 1" long).

14.Install the roller chain around the sprockets. Adjust the position of the tractor axle (shaft) if necessary so as to align the chain correctly. Tighten the chain as required by adjusting the nuts on the 5/8"-11 x 6" threaded rod.

NOTE: Tighten bearing lock collar.

1/4" x 1" Square key

13 Tooth sprocket

Roller chain

Figure 3I

PNEG-1597Sweep Tractor Assembly Instructions 19