Other Mighty Mule and GTO/PRO
Access Controls and Accessories
Replacement Battery (FM150)
Standard 12 volt, 7.0
Low Voltage Wire (RB509)
The 16 gauge,
11" Push to Open Bracket (FM148)
Required when Mighty Mule® 500/502 gate operator(s) must push the gate open, such as on a sloping driveway or where space prevents gate(s) from opening inward (pulled open). Order two PTO brackets for conversion of a dual swing gate installation.
Column Mount Lock Receiver (433IH)
For mounting the Automatic Gate Lock on brick columns, walls, or for other applications with limited space between gate and post.
Replacement Transformer (RB570)
Standard 18 volt, 2200 mA, AC transformer for maintaining the battery included with the Mighty Mule® gate operator. This is the only transformer approved for use with all UL325 Mighty Mule® gate operator systems.
Garage Door Receiver (RB709U)
The Garage Door Receiver allows you to use the same Mighty Mule® entry transmitter (see Dual Trans- mitter) to operate your gate operator and your garage door operator. Compatible with most garage door operators.
If you have a question about any special order item,
just call
3121 Hartsfield Road • Tallahassee, Florida, USA 32303
Telephone GTO Sales:
or GTO Technical Service:
www.gtoinc.com
The contents of all material available on this installation manual are copyrighted by GTO, Inc. (“GTO”), unless otherwise indicated. All rights are reserved by GTO, and content may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior, written permission of GTO. Any reprinting of GTO publications is by permission only. Copyright infringement is a violation of federal law.
Mighty Mule¨,
All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO.