R3000REV0310:Digital Humidifier Manual 2L 3/2/10 3:59 PM Page 5

MAINTENANCE

·Always unplug the unit before servicing it in any way.

·Be careful when handling the water if warm humidification was selected. The water temperature of the water remaining in the unit after use may be high.

·Do not submerse the unit in water, or allow water to enter anywhere on the unit except the designated water tank.

INSIDE THE BODY OF THE UNIT

While the water tank has been treated with Silver Clean Technology to fight the growth of mold, regular cleaning of the tank and body is recommended to maximize water cleanliness.

Pour excess water out of the unit. Make sure water does not enter the hole where the water vapor comes out.

Wash out the unit with fresh water, using a cleaning brush and a soft cloth.

Ultrasonic Metal Disk

Humidity levels become weak when water spots remain on the surface of the ultrasonic metal disk.

Do not use chemicals or detergents.

OUTER SURFACE OF THE UNIT

Wipe the surface of the unit with a soft damp cloth if needed. Do not use any type of cleaning chemical as it may corrode the surface.

WATER TANK

If water spots remain in the water tank, wipe the inside with a soft cloth. Do not use soap or detergents. Silver Clean particles have been added to the water tank to help fight the growth of mold, mildew and bacteria.

AIR FILTER

Gently wipe away debris from the filter with a soft cloth. This filter does not need to be replaced.

ULTRASONIC DISK

Remove spray spout (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from this area (Fig. 2). White vinegar will help to prevent this build up.

Fig. 1

Fig. 2

STORAGE

·Fully dry the inside and outside of the unit before storing it.

·DO NOT leave water in the unit.

·Store in a cool dry place.

TROUBLESHOOTING GUIDE

PROBLEM

SOLUTION

 

 

Water vapor & humidity are not

Power Plug: Unplug and then try again.

produced.

Power Failure: When the power is returned, try again.

 

 

Tank Installation: Make sure the tank is correctly

 

attached.

 

Make sure spring on tank cap moves freely when pushed.

 

 

Air blows but water vapor is not

Excessive Water: Remove a certain amount of water from

produced.

the tank.

 

The desired humidity is lower than the current

 

temperature: increase the desired humidity.

 

Detergent residue in the tank: Wash the tank out

 

and try again.

 

 

Humidity level is low.

The surface of the ultrasonic metal disk may be dirty:

 

Wipe it off with a dry soft cloth. Clean with white vinegar.

 

The water in the unit is too cold: Replace with cool, but

 

not cold water.

 

 

Warm humidity is not produced.

It may take 10-15 min. before warm humidity is created.

 

The mist may not feel warm to the touch.

 

Check to see if the base of the unit feels warm to the

 

touch. If so, warm mist is being produced.

 

 

The humidity has a bad smell.

Poor maintenance or dirty water: Clean the product

 

thoroughly, and fill it with fresh water.

 

 

White dust is forming on nearby

Hard water will deposit a certain amount of dust. Dust in

furniture.

the air settles because of the added humidity in the room.

 

Use distilled water if this becomes a nuisance.

 

 

My current humidity will not go

The unit will not display a humidity setting below 25%.

below 25%.

This means the current humidity in your room is at or

 

below 25%.

 

 

E-8

E-9

Page 4 Page 6
Page 5
Image 5
Guardian Technologies R3000 warranty Maintenance, Storage, Troubleshooting Guide
Page 4 Page 6

R3000 specifications

The Guardian Technologies R3000 is an innovative air purifier designed to improve indoor air quality and create a healthier living environment. With concerns about air pollution and its effects on health, the R3000 offers an advanced solution that combines multiple technologies for maximum effectiveness.

One of the standout features of the R3000 is its 3-in-1 filtration system. This system consists of a pre-filter, a true HEPA filter, and a UV-C light. The pre-filter captures larger particles such as dust and pet hair, while the true HEPA filter is capable of trapping 99.97% of airborne particles as small as 0.3 microns, including pollen, mold spores, and even smoke. This high level of filtration is particularly beneficial for allergy sufferers and those with respiratory conditions.

In addition to its powerful filtration capabilities, the R3000 employs UV-C technology, which helps to eliminate harmful bacteria and viruses in the air. This dual-action approach ensures that not only are particulates filtered from the air, but pathogens are also rendered inactive, contributing to a safer indoor atmosphere.

The R3000 is designed with user-friendliness in mind. It features an intuitive control panel that allows users to adjust fan speeds and set timer functions according to their preferences. The purifier also operates quietly, making it suitable for bedrooms, living rooms, and workplaces without causing distractions.

Another key characteristic of the R3000 is its compact and stylish design, which allows it to blend seamlessly into various home or office décors. Its energy-efficient operation ensures low energy consumption while still delivering powerful air purification, with many users appreciating that it can run continuously without significantly impacting electricity bills.

The R3000 also includes filter replacement indicators, notifying users when it's time to change the filters, thus simplifying maintenance and ensuring optimal performance.

Overall, the Guardian Technologies R3000 stands out as an effective and stylish solution for those looking to enhance their indoor air quality. Its combination of filtration technologies, user-friendly features, and sleek design makes it an excellent choice for anyone concerned about the air they breathe. As air quality continues to be a priority for many, the R3000 offers a robust solution that caters to modern living needs.
Top Page Image Contents