1. Installing and Replacing Housing Rails
CAUTION: For the iPod ( with video ) 60Gb and 80Gb to fit into the housing you must replace the thick clear rails that come installed in the housing with thin grey rails which are included in this bag.
*If you are unsure which rails you need or if you need rails please contact H2O Audio*
1.Use the small Phillips Screwdriver in a counterclockwise direction to remove all three ( 3 ) screws from the clear rail.
2.Once all the screws are removed, gently lift the clear rail out of the housing. Do not leave any screws in the housing as they may interfere with the accurate closure of the housing.
3.Replace the clear rail that was removed, with a thin grey rail provided in this bag.
4.Repeat steps 1 - 3 for the other clear rail.
NOTE: Be very careful, do not damage the T - Seal with the screwdriver.
S5 - 52 20070306
