If the above dialog box does not, Manually | Sony AR-208S specification

MAC OS 9.0 - 9.2.2

10	Select the PPD file.		13	Select the machine configuration.

(1)

(2)

(1)Click the PPD file for your model.

(2)Click the "Select" button.

•	If the above dialog box does not
Note	appear and you return to the
	appear and you return to the
	"Chooser" dialog box, follow these
	steps to select the PPD file
	manually.
	(1) Make sure that the machine is
	selected in the "Select a
	PostScript Printer" list, and then
	click the "Setup" button followed
	by the "Select PPD" button.
	(2) Select the PPD file for your
	model and click the "Open"
	button.
	(3) Click the "OK" button.
•	The PPD file is installed in the
	"Printer Descriptions" folder in the
	"Extensions" folder.

11 Make sure that the machine is selected in the "Select a PostScript Printer" list and then click the "Setup" button.

12 Click the "Configure" button.

(1)

(2)

(1)Select the options that are installed on the machine.

(2)Click the "OK" button.

14 Click the "OK" button in the window of step 12 to close the window.

15 Click the close box () to close the "Chooser".

This completes the configuration of the printer driver.

Installing the screen fonts

The screen fonts for Mac OS 9.0 - 9.2.2 are contained in the "Font" folder of the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. Copy the fonts that you wish to install to the "System Folder" of the startup disk.

If you experience problems that may Note be due to the installed screen fonts, immediately delete the installed fonts

from the system.

Macintosh

To automatically configure the settings Note based on the installed machine

options that are detected, click the "Auto Setup" button.

- 24 -

Image 232

Sony AR-208S If the above dialog box does not, Appear and you return to, Chooser dialog box, follow these, Manually

Contents

AR-208S AR-208D For users in the USA Checks Passports Drivers licenses Contents User Settings Do not install your machine in areas that are Important points when selecting an installation site20 cm 10 cm Software License Environmental InformationTrademark acknowledgements For users in the USA Safety Precautions For users in Canada Using the manual Online Manual on the accessory CD-ROMIntroduction Conventions used in this manual and online manual Main Features Enhanced copying featuresHigh-speed laser copying High-quality digital image Laser printer function LCD panel displays messagesColor scanner function Preparations Part Names Operation panel AR-208S Display 100% 5x11 Power on and OFF Power on Power off Power save modesPreheat mode Auto power shut-off mode Paper For best results, use only Sharp recommended paper Loading the Paper Tray Follow these guidelines when using special papersSpecial papers Gently push the paper tray back into the machine Bypass Feed including special paper Important points when inserting paper in the bypass trayEnvelopes Loading paper in the bypass tray Open the bypass tray and extend the trayPress the Tray Select key to select the bypass tray Print face Changing a Trays Paper Size Setting Follow these steps to change a trays paper size settingSelect the tray, and then press Press the Menu key Using the document glass Normal CopyingCopying books or originals with folds or creases This chapter explains basic copying functions Using the Rspf Select the number of copies and any other copy settings,Document feeder tray without trying To force them Originals that cannot be used in the Rspf Original output tray extensionCapacity of paper output tray Paper output tray extension Setting the number of copies Selecting the TrayPress the Tray Select key Press the numeric keys to set the number of copies Making a Copy Darker or Lighter Selecting a preset ratio Fine adjustment of the ratioREDUCTION/ENLARGEMENT/ZOOM Copy will be delivered to the paper output tray Automatic TWO-SIDED Copying AR-208D only Using the document glass AR-208D only Place the originals in the RSPF. p.21 Press the Enter key Sort Copy When all originals have been scanned, press the keySort appears and then press If the memory becomes full Place the originals. p.21Offset function during sort copy 1 copy Copying Multiple Originals Onto a Single Sheet of Paper2IN1 appears and then press ORIG. Size Enter Place the originals. p.21 Press the E-SORT/SP.FUN key until Copy is delivered to the paper output tray Creating Margins When Copying Margin shiftPlace the originals Press the E-SORT/SP.FUN key until Margin Shift appears and then press Margin Shift on OFF Software MFP driverSharpdesk Button Manager Before Installation Hardware and software requirementsWindows 98, Windows Me, Windows 2000 Professional*5 Windows XP*5, Windows Vista*5 Installing the Software Double-click the setup icon Select Connected to this computer and click the Next button Follow the on-screen instructions Installing the Software When installing is finished, click the Close button This completes the installation of the software Connecting a USB cable Using the machine as a shared printer Select Connected via the network and click the Next button You will return to the window of . Click the Close button Click the Add Network Port buttonWindows Vista, the Add Network Port button does not appear Windows XP/Vista Setting UP Button ManagerWindows Vista, select Properties from the Organize menu Installing the Software Windows 98/Me/2000 Select Sharp AR-XXXX and click the Properties button Select Sharp Button Manager T Send to this application System requirements for USB 2.0 Hi-Speed mode User programs p.58 Using the Printer Mode Basic Procedure for PrintingCanceling a print job Make sure that paper is loaded in the tray Scanning Using the Keys on the Machine Using the Scanner ModeScanning from the operation panel of the machine Operation in COPY, PRINTER, and Scanner Modes Scanning from Your ComputerButton Manager scan menu Viewing the online manual HOW to USE the Online ManualClick to read the online manual Copy mode User Programs Power shut-off mode, no keys Except the Start key Can be used Use this setting to selectLayout patterns When enabled, this function Job in printer mode Use this setting to set Or increase when held downYou can prevent settings from This sets the volume of beep This is used to adjust Be adjusted separately forFactory default setting To the factory default settings Print mode OFF Change the setting of the selected item Selecting a Setting for a User ProgramPress the Menu key and then press the Enter key Base settings Base setting beepOne beep Invalid key beep Indication Cause and remedy Lamp indicator Display Display Messages Toner cartridge is not installed ErrorIndicator Steadily Service by an authorized Sharp Troubleshooting the Machine Paper Problem Cause and solution Misfeed occur Paper is outside of the specified Size and weight rangePaper is not loaded properly Paper misfeed Machine is in auto power shut-off Memory FULL, Press Start to Problems During Setup of the Software MFP driver cannot be installed Windows 2000/XPClick Performance and Maintenance, and then click System Click the start button and then click Control Panel Plug and play screen does not appear Click the icon beside Universal Serial Bus controllers Install the software as explained in Installing Removing the softwareClick the icon beside Other Devices Misfeed Removal Misfeed in the fusing area Misfeed in the paper feed area Lower the fusing unit release lever See B Misfeed in the fusing area p.71Misfeed in the transport area Open the front cover Misfeed in the Rspf Document feeder cover Rspf jam release lever Toner Cartridge Replacement Gently pull the toner Cartridge out while pressing the lock release leverToner cartridge lock release lever Or 5 times Shutter Toner seal Scan Head Locking Switch LockUnlock Checking the Total Count Maintenance RequiredPress the key or key to display the count of each function Cleaning the Machine Wipe the cabinet with a soft, clean clothCabinet Document glass and the back side of the Rspf Transfer charger System Configuration Facsimile Expansion KIT AR-FX13Network Expansion KIT AR-NB2 a PS3 Expansion KIT AR-PK1N Using the AR-D33 with the printer function Interface cableUSB interface cable Please purchase the appropriate cable for your computer Specifications Fusing system ResolutionPower supply Power consumption Printer Function Scanner Function Paper weight WeightSheet paper feed unit AR-D33 Paper size Material Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Transport Information Msds No. F-31601 Not toxic to aquatic organisms Dust explosion, like most finely divided organic powders Date Issued Nov.01 Msds No. F-31601 Symbols Index Power switch Problems during setupMisfeed removal Normal copying Ready indicator System configuration System requirements for USBRemoving the software Roller rotating knob Tray Select key Using convenient copy functions Connecting the computerTroubleshooting and maintenance Preparations Memo Memo For users in the USA Sharp Electronics Corporation AR-FX13 For users in the USA Important safety instructions Introduction FCC Notice to users Sharp Electronics Corporation Table of Contents Appendix Memory transmission mode Using the Rspf p.52Direct transmission mode Using the document glass p.53 Dialing methods Sending a fax Sending a fax to multiple destinations Broadcasting p.71 Selecting the reception mode p.63Storing a fax job while another job is in progress List of FAX Functions RX Data Transfer Never Prints Middle OFF Memory Poll Mode Selecting Settings for the Function Press the Mode Select key to select fax modeSelect a setting or enter information Press the Menu key Connections Connecting the Telephone Line CordOnline Manual on the CD-ROM Final Preparations Connecting Other DevicesComments Initial Settings Part Names Look AT the FAX Operation Panel Initial Settings Using the Arrow Keys Adjusting the Beep Volume Adjusting the Ringing Volume 18RINGER VolumePress the key or key to set the ringer volume 4USER Program Setting the Length of Alarm Beeps 17BEEP Length 19BEEPER Volume Press the key or key to set the alarm volume FAX Setup HOW to Enter Characters Entering Your Name and FAX Number 2ENTRY Mode3OWN Passcode SET Press the Enter key Press the Menu key Setting the Date and Time2DATE&TIME SET 1TIME Format 23DATE&TIME FormatPress the key or key to select 112HOUR or 224HOUR 2DATE Format Press the key or key to select the display order 5DAY Light Saving Daylight Saving Time SettingPress the key or key to select 1ON or 2OFF Memory transmission the Memory indicator is lit Selecting the Transmission ModeDirect transmission the Memory indicator is off Selecting the Reception Mode # of Rings Auto Press a numeric key to select the number of rings Selecting the Reception Paper Size # of Rings Manual 25TRAY Selection Setting the Tray SelectionPress the key or key to select the tray selection 20DIAL Mode Setting the Dial ModePress the key or key to select the dial mode When the line is busy Setting the Number of Recall Times8RECALL Times Busy When a communication error occurs 9RECALL Times ERR 10RECALL INT. Busy Setting the Recall IntervalPress the numeric keys to select the recall interval 11RECALL INT. ERR Setting the Index Function 22INDEX Print Press the key or key to select the transmission resolution Setting Resolution Priority3RESO. Priority Setting UP the Machine for USE with a PC Modem 15FAX Signal RCV Using the Remote Reception Function 14REMOTE Reception Press a numeric key to enter the Fax Remote Number 13FAX Remote NumberPress the Menu key 21DISTINCTIVE Ring Distinctive RingingPress the key or key to select a ringing pattern Storing Numbers for Automatic Dialing Storing numbersEnter the fax number with the numeric keys 1FAX Number Enter the name of the destination with the numeric keys Press the key or key to select a Chain Dial settingTo select the communication speed 2CLEAR Press the Menu key a number of times until you exit Storing Numbers Under Group Keys 3GROUP KEY Enter a name for the Group Key with the numeric keys Enter Characters 1FAX # Enter the numbers that you wish to delete 2END Using the Machine with AN Answering Machine 6A.M. ModeQuiet Detect Time 1QUIET Detect Time If Quiet Detect Time is not working properly Answering Machine Backup2AUTO Receive Size and Weight When using the RspfWhen using the document glass Originals Suitable for Faxing Unsuitable Originals Setting the Original Adjust the original guides to the width of your originalsSending Originals There are two ways to send the fax Mark Gently close the RspfPress the Start key Press the # key Optional Transmission Settings Original Size1DOC. Glass Size Press the key or key to select the original size Resolution Contrast Cover Sheet 1COVER Sheet SET 2TX Message SET Message FunctionPress the key or key to select a message TWO-SIDED Original Transmission Function Place the originals in the Rspf Dialing and Transmitting Direct Keypad DialingRapid KEY Dialing Speed Dialing Chain Dialing Normal Dialing Using the Speaker KEYDial the fax number of the receiving machine Redialing Using the Search KEYPress the REDIAL/PAUSE key Press the Start key If the Memory Becomes Full While Scanning AN Original Canceling Deleting a Stored FAX JOB3MEMORY Status Using Auto Mode Using MAN. ModeUsing A.M. Mode Receiving Faxes Optional Reception Settings Sided RX Press the key or key to select 1ON or 2OFF Receive Reduce 16RCV Reduce When Using Manual Sending and Receiving Memory Substitute Reception into Memory 0RX Data Transfer Data Transfer2FAX Number 1DATA Transfer 1YES Transmission Reservation Broadcasting Press the Broadcast key Broadcasting using a Group key Press the appropriate Group key Polling 8POLLING ModePolling Serial Polling 9SERIAL Poll ModePress the Menu key Press the Enter key 7MEMORY Poll Mode Setting up polling transmissionPolling Transmission Memory Polling Adding a original to polling memory Deleting originals from polling memory Restricting Polling Machines Polling Security Press the Menu key Press the key or Key To select 1ON1ON 12SECURITY Select 4PASSCODE # Mode Press the key or key to select 1SET and press the Enter key Timer Operations 1TIMER ModePress the key or key to select 1SET Enter the time at which transmission Canceling a Timer Transmission JOB 5ANTI Junk FAX Anti Junk FAX1ANTI Junk Select To store junk fax numbers, use the following procedure To clear junk fax numbers, use the following procedure Operation in COPY, PRINTER, SCANNER, and FAX Modes Troubleshooting Printing OUT Reports Passcode List User Program List 6AUTO Listing Activity Report Auto ListingPress the key or key to select 1ON and press the Enter key Printing Transaction Reports 7PRINT Selection Troubleshooting → Replace the TD cartridge Audible Signals Messages and SignalsDisplay Messages Specifications Appendix Index Rspf Fax setup Storing/settingsFaxes, sending and receiving Special functions Memo Memo Memo Canada Avis Pour NOS AR-FX13 AR-NB2 a Network Expansion KIT Safety Standards Introduction Trademark acknowledgments Contents Software CD-ROM Disc PCL6 and PCL5e printer driverPS printer driver PPD driver \Sadmin\Documents\EnglishA Sharpdesk CD-ROMs for Windows Windows Macintosh Operating systemMac OS 9.0 to PPD driver Connecting to a Network Status button Additional user programs for Print mode Program Settings factory Program nameExplanation Number Setup in a Windows Environment Click the Printer Driver button Window confirming installation of the display fonts If you are using WindowsFollow the on-screen instructions Printer name window Installing the Printer Status Monitor p.15 Click the Close button Sharing the Printer Using Windows Networking Your operating system If you are using Windows Vista Click the Close button in the windowStep If the shared printer does not appear Click the Printer Status Monitor button Click the Close button in the window of step Installing the PS Display Fonts Using the PPD File Operating system PPD file path Configuring the Printer Driver Status, click the Auto Configuration button Click the Continue button V10.1.5 V10.2.8 V10.3.9 V10.4 Double-click the Printer Setup Utility icon Click the Install buttonClick Add Configure the printer driver Select AppleTalk Select the machine configuration MAC OS 9.0 Click the Setup button followed PPD file is installedIf the above dialog box does not Appear and you return to AR-NB2 a AR-NB2 a Warranty Trademark Acknowledgments Introduction Contents Before Using the Network Scanner Function Click Help under the menu frame Open the Web browser on your computerClose the Web Admin Mode Menu frameSystem Information Scan Management Scan Mode settings When you have finished selecting the settings, click SubmitDescription Default setting Click Add below the scan list Storing destinations for Scan to E-mail Description FTP destination information Storing destinations for Scan to FTP Scan to Desktop destination information Storing destinations for Scan to Desktop Storing Groups Scan to E-mail For the settings, see the following tableStoring a group of destinations Editing and deleting programmed transmission destinations Click Destination in the menu frame of the Web Passwords p.16 Clock AdjustQuick Setup p.15 Services p.15 Configure the Advanced Setup settings Click Network Scanning in the menu frameSelect the transmission methods that you wish to use Set a limit for the size of image files Configuring SMTP, DNS and Ldap server settings Configuring Smtp and DNS server settingsConfigure the required parameters for that server Enter the required information in SMTP, DNS and Ldap Enter passwords in User Password and Admin Password When you have completed all entries Click Submit Press the Start key to begin scanning Clear key Sending an image by entering an e-mail address manually Press the Mode Select key to select scanner modeSelect Input Address and press the Enter key Enter search characters and press the Enter key Search characters will Image Orientation and Standard Original Loading Orientation Scanning result Problem Cause and solution Viewer program used by the recipient does not supportFormat of the received image data Destination was selected Resolution Error Code Solution Important Points When Using Scan to E-MAIL Text original a Photo original B Checking the IP Address Status button Sharpdesk CD-ROM for Windows Network Scanner Tool Sharp Twain AR/DM Twain driver Users Guides for Software Programs Double click the CD-ROM icon Click the start button and then click My ComputerFollow the instructions on the screen Double click Add or Remove Programs Click Control Panel in the start menuSharpdesk CD-ROM for Windows Specifications AR-NB2 a for network scanner Network expansion kit Online Manual Introduction Trademark Acknowledgments How to use the online manual How to Control the Online ManualUsing Bookmarks How to Print Out This Manual Contents Troubleshooting Wish to print Basic printingPrinter. If you need to change any print Cancel a print job When Paper Source is set to Auto SelectIf the tray runs out of paper during printing Click the Start button, select Settings On Windows 98/Me, click the Setup tabPanel Click Printers and Other Hardware, and then Printer driver settings Machine image Two-sided printing Print data Printing result Sided Book Sided Tablet Pamphlet style Printing result Print data Right Turning Pamphlet Printing multiple pages on one Fitting the printed image to the paper Rotating the print image 180 degrees Printing a watermark How to Print a WatermarkPrint sample Printing text in black Printing text and lines/graphics in blackPrinting lines and vector graphics in black Before using the Printer Status Monitor Printer utilities Using the printer utilities Using the printer utilitiesStarting up the printer utilities Changing the Printer Status Monitor settings Change the Printer Status Monitor settings as desiredRight-click the Printer Status Monitor icon On the task bar, and select Preferences from Checking the printer status On the task bar, and select SharpStatus from the pop-up menu Click the Detail button Make sure that the correct printer is selected Configure print settings That you wish to printClick the Print button When Paper Feed is set to Auto Select How to access the Web page and view help About the Web pages About the Web pages for users 2System Information Advanced job settings Directly printing a file in a computer Configuring the printer condition settings How to configure the settings 3Settings Printer condition setting menu Condition Settings Default Settings Printer condition settings Default Settings PCL Settings PostScript Settings About the Web pages for the administrator Click Passwords in the menu frame Admin PasswordPassword Submit Mail print function Setting up the E-mail print functionClick Print Port in the menu frame Using the E-mail print function CopiesTwo-sided print File type Configuring a setting in the key operator programs Key operator programs Interface settings Key operator programs Information setup Smtp setupClick Services in the menu frame Click Information in the menu frame Status message setup Click Status Message in the menu frameClick Submit to store the entered information Destination addresses and time schedule Click Alerts Message in the menu frame Alerts message setupEnter the destination addresses Troubleshooting Check the connections Windows Removing the softwareMacintosh Mac OS 9.0 to Printer specifications Network expansion kit memory*2 Printer driver specifications PPD Printer driver specifications Ropm Index Numerics