Additional user programs for Print mode, Explanation | Sony AR-208S

USER PROGRAMS FOR THE NETWORK EXPANSION KIT

When the network expansion kit is installed in the machine, the following programs are added to the user programs for Print mode.

The IP address and other network settings are configured using these user programs.

Note

The procedure for selecting a user program setting is explained in "SELECTING A SETTING FOR A USER PROGRAM" in the operation manual.

Additional user programs for Print mode

	Program		Settings (factory
	Program	Program name	default settings	Explanation
	number	Program name	default settings	Explanation
	number		appear in bold)
			appear in bold)

				This program must be enabled to use the
			1: YES	machine on a TCP/IP network. "IP ADDRESS
	4	ENABLE TCP/IP	1: YES	SETTING" must also be configured.
	4	ENABLE TCP/IP	2: NO	SETTING" must also be configured.
			2: NO	This program is initially enabled (factory default
				This program is initially enabled (factory default
				setting).

				If "YES" is selected (factory default setting) and
			1: YES	the machine is connected to a TCP/IP network,
	5	ENABLE DHCP	1: YES	the IP address will be acquired automatically.
	5	ENABLE DHCP	2: NO	the IP address will be acquired automatically.
			2: NO	If you will manually assign an IP address using
				If you will manually assign an IP address using
				"IP ADDRESS SETTING", select "NO".

				This program is used to set the IP address (IP
				address, Subnet Mask, and Gateway) of the
		IP ADDRESS	• IP ADDRESS	machine when TCP/IP protocol is used on the
	6	IP ADDRESS	• SUBNETMASK	network.
	6	SETTING	• SUBNETMASK	network.
		SETTING	• DEFAULT GATEWAY	When "ENABLE DHCP" is selected, the
			• DEFAULT GATEWAY	When "ENABLE DHCP" is selected, the
				machine will obtain an IP address
				automatically. This is the factory default setting.

				This program must be enabled to use the
		ENABLE	1: YES	machine on a network that uses NetWare
	7	ENABLE	1: YES	protocol.
	7	NETWARE	2: NO	protocol.
		NETWARE	2: NO	This program is initially enabled (factory default
				This program is initially enabled (factory default
				setting).

				This program must be enabled to use the
		ENABLE	1: YES	machine on a network that uses EtherTalk
	8	ENABLE	1: YES	protocol.
	8	ETHERTALK	2: NO	protocol.
		ETHERTALK	2: NO	This program is initially enabled (factory default
				This program is initially enabled (factory default
				setting).

				This program must be enabled to use the
		ENABLE	1: YES	machine on a network that uses NetBEUI
	9	ENABLE	1: YES	protocol.
	9	NETBEUI	2: NO	protocol.
		NETBEUI	2: NO	This program is initially enabled (factory default
				This program is initially enabled (factory default
				setting).

- 9 -

Image 217

Sony AR-208S Additional user programs for Print mode, Program Settings factory Program name, Explanation, Number

Contents

AR-208S AR-208D Checks Passports Drivers licenses For users in the USA Contents User Settings Do not install your machine in areas that are Important points when selecting an installation site20 cm 10 cm Environmental Information Software LicenseTrademark acknowledgements For users in the USA For users in Canada Safety Precautions Online Manual on the accessory CD-ROM Using the manualIntroduction Conventions used in this manual and online manual Enhanced copying features Main FeaturesHigh-speed laser copying High-quality digital image Laser printer function LCD panel displays messagesColor scanner function Part Names Preparations AR-208S Operation panel 100% 5x11 Display Power on Power on and OFF Power save modes Power offPreheat mode Auto power shut-off mode For best results, use only Sharp recommended paper Paper Loading the Paper Tray Follow these guidelines when using special papersSpecial papers Gently push the paper tray back into the machine Bypass Feed including special paper Important points when inserting paper in the bypass trayEnvelopes Open the bypass tray and extend the tray Loading paper in the bypass trayPress the Tray Select key to select the bypass tray Print face Follow these steps to change a trays paper size setting Changing a Trays Paper Size SettingSelect the tray, and then press Press the Menu key Normal Copying Using the document glassCopying books or originals with folds or creases This chapter explains basic copying functions Select the number of copies and any other copy settings, Using the RspfDocument feeder tray without trying To force them Original output tray extension Originals that cannot be used in the RspfCapacity of paper output tray Paper output tray extension Selecting the Tray Setting the number of copiesPress the Tray Select key Press the numeric keys to set the number of copies Making a Copy Darker or Lighter Fine adjustment of the ratio Selecting a preset ratioREDUCTION/ENLARGEMENT/ZOOM Copy will be delivered to the paper output tray AR-208D only Automatic TWO-SIDED Copying Using the document glass AR-208D only Press the Enter key Place the originals in the RSPF. p.21 Sort Copy When all originals have been scanned, press the keySort appears and then press If the memory becomes full Place the originals. p.21Offset function during sort copy 1 copy Copying Multiple Originals Onto a Single Sheet of Paper2IN1 appears and then press ORIG. Size Enter Copy is delivered to the paper output tray Place the originals. p.21 Press the E-SORT/SP.FUN key until Margin shift Creating Margins When CopyingPlace the originals Press the E-SORT/SP.FUN key until Margin Shift appears and then press Margin Shift on OFF MFP driver SoftwareSharpdesk Button Manager Hardware and software requirements Before InstallationWindows 98, Windows Me, Windows 2000 Professional*5 Windows XP*5, Windows Vista*5 Double-click the setup icon Installing the Software Follow the on-screen instructions Select Connected to this computer and click the Next button Installing the Software This completes the installation of the software When installing is finished, click the Close button Connecting a USB cable Select Connected via the network and click the Next button Using the machine as a shared printer You will return to the window of . Click the Close button Click the Add Network Port buttonWindows Vista, the Add Network Port button does not appear Windows XP/Vista Setting UP Button ManagerWindows Vista, select Properties from the Organize menu Installing the Software Select Sharp AR-XXXX and click the Properties button Windows 98/Me/2000 Select Sharp Button Manager T Send to this application User programs p.58 System requirements for USB 2.0 Hi-Speed mode Basic Procedure for Printing Using the Printer ModeCanceling a print job Make sure that paper is loaded in the tray Scanning Using the Keys on the Machine Using the Scanner ModeScanning from the operation panel of the machine Operation in COPY, PRINTER, and Scanner Modes Scanning from Your ComputerButton Manager scan menu Viewing the online manual HOW to USE the Online ManualClick to read the online manual User Programs Copy mode Except the Start key Can be used Use this setting to select Power shut-off mode, no keysLayout patterns When enabled, this function Job in printer mode Or increase when held down Use this setting to setYou can prevent settings from This sets the volume of beep Be adjusted separately for This is used to adjustFactory default setting To the factory default settings OFF Print mode Change the setting of the selected item Selecting a Setting for a User ProgramPress the Menu key and then press the Enter key Base setting beep Base settingsOne beep Invalid key beep Display Messages Indication Cause and remedy Lamp indicator Display Error Toner cartridge is not installedIndicator Steadily Service by an authorized Sharp Troubleshooting the Machine Paper Paper is outside of the specified Size and weight range Problem Cause and solution Misfeed occurPaper is not loaded properly Paper misfeed Memory FULL, Press Start to Machine is in auto power shut-off MFP driver cannot be installed Windows 2000/XP Problems During Setup of the SoftwareClick Performance and Maintenance, and then click System Click the start button and then click Control Panel Click the icon beside Universal Serial Bus controllers Plug and play screen does not appear Removing the software Install the software as explained in InstallingClick the icon beside Other Devices Misfeed Removal Misfeed in the paper feed area Misfeed in the fusing area See B Misfeed in the fusing area p.71 Lower the fusing unit release leverMisfeed in the transport area Open the front cover Document feeder cover Rspf jam release lever Misfeed in the Rspf Toner Cartridge Replacement Cartridge out while pressing the lock release lever Gently pull the tonerToner cartridge lock release lever Or 5 times Shutter Toner seal LockUnlock Scan Head Locking Switch Checking the Total Count Maintenance RequiredPress the key or key to display the count of each function Wipe the cabinet with a soft, clean cloth Cleaning the MachineCabinet Document glass and the back side of the Rspf Transfer charger Facsimile Expansion KIT AR-FX13 System ConfigurationNetwork Expansion KIT AR-NB2 a PS3 Expansion KIT AR-PK1N Interface cable Using the AR-D33 with the printer functionUSB interface cable Please purchase the appropriate cable for your computer Specifications Resolution Fusing systemPower supply Power consumption Printer Function Scanner Function Weight Paper weightSheet paper feed unit AR-D33 Paper size Material Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Transport Information Msds No. F-31601 Not toxic to aquatic organisms Dust explosion, like most finely divided organic powders Date Issued Nov.01 Msds No. F-31601 Index Symbols Problems during setup Power switchMisfeed removal Normal copying System configuration System requirements for USB Ready indicatorRemoving the software Roller rotating knob Tray Select key Connecting the computer Using convenient copy functionsTroubleshooting and maintenance Preparations Memo Memo For users in the USA Sharp Electronics Corporation AR-FX13 For users in the USA Introduction Important safety instructions Sharp Electronics Corporation FCC Notice to users Table of Contents Appendix Using the Rspf p.52 Memory transmission modeDirect transmission mode Using the document glass p.53 Sending a fax Dialing methods Sending a fax to multiple destinations Broadcasting p.71 Selecting the reception mode p.63Storing a fax job while another job is in progress RX Data Transfer List of FAX Functions Never Prints Middle OFF Memory Poll Mode Press the Mode Select key to select fax mode Selecting Settings for the FunctionSelect a setting or enter information Press the Menu key Connections Connecting the Telephone Line CordOnline Manual on the CD-ROM Final Preparations Connecting Other DevicesComments Part Names Initial Settings Look AT the FAX Operation Panel Initial Settings Adjusting the Beep Volume Using the Arrow Keys 18RINGER Volume Adjusting the Ringing VolumePress the key or key to set the ringer volume 4USER Program 17BEEP Length Setting the Length of Alarm Beeps Press the key or key to set the alarm volume 19BEEPER Volume HOW to Enter Characters FAX Setup Entering Your Name and FAX Number 2ENTRY Mode3OWN Passcode SET Press the Enter key Press the Menu key Setting the Date and Time2DATE&TIME SET 1TIME Format 23DATE&TIME FormatPress the key or key to select 112HOUR or 224HOUR Press the key or key to select the display order 2DATE Format 5DAY Light Saving Daylight Saving Time SettingPress the key or key to select 1ON or 2OFF Memory transmission the Memory indicator is lit Selecting the Transmission ModeDirect transmission the Memory indicator is off Selecting the Reception Mode Press a numeric key to select the number of rings # of Rings Auto # of Rings Manual Selecting the Reception Paper Size 25TRAY Selection Setting the Tray SelectionPress the key or key to select the tray selection 20DIAL Mode Setting the Dial ModePress the key or key to select the dial mode When the line is busy Setting the Number of Recall Times8RECALL Times Busy 9RECALL Times ERR When a communication error occurs 10RECALL INT. Busy Setting the Recall IntervalPress the numeric keys to select the recall interval 11RECALL INT. ERR 22INDEX Print Setting the Index Function Press the key or key to select the transmission resolution Setting Resolution Priority3RESO. Priority 15FAX Signal RCV Setting UP the Machine for USE with a PC Modem 14REMOTE Reception Using the Remote Reception Function Press a numeric key to enter the Fax Remote Number 13FAX Remote NumberPress the Menu key 21DISTINCTIVE Ring Distinctive RingingPress the key or key to select a ringing pattern Storing numbers Storing Numbers for Automatic DialingEnter the fax number with the numeric keys 1FAX Number Enter the name of the destination with the numeric keys Press the key or key to select a Chain Dial settingTo select the communication speed Press the Menu key a number of times until you exit 2CLEAR 3GROUP KEY Storing Numbers Under Group Keys Enter Characters Enter a name for the Group Key with the numeric keys 2END 1FAX # Enter the numbers that you wish to delete 6A.M. Mode Using the Machine with AN Answering MachineQuiet Detect Time 1QUIET Detect Time If Quiet Detect Time is not working properly Answering Machine Backup2AUTO Receive When using the Rspf Size and WeightWhen using the document glass Originals Suitable for Faxing Unsuitable Originals Adjust the original guides to the width of your originals Setting the OriginalSending Originals There are two ways to send the fax Gently close the Rspf MarkPress the Start key Press the # key Original Size Optional Transmission Settings1DOC. Glass Size Press the key or key to select the original size Contrast Resolution 1COVER Sheet SET Cover Sheet 2TX Message SET Message FunctionPress the key or key to select a message Place the originals in the Rspf TWO-SIDED Original Transmission Function Direct Keypad Dialing Dialing and TransmittingRapid KEY Dialing Speed Dialing Chain Dialing Normal Dialing Using the Speaker KEYDial the fax number of the receiving machine Redialing Using the Search KEYPress the REDIAL/PAUSE key Press the Start key If the Memory Becomes Full While Scanning AN Original Canceling Deleting a Stored FAX JOB3MEMORY Status Using MAN. Mode Using Auto ModeUsing A.M. Mode Receiving Faxes Sided RX Press the key or key to select 1ON or 2OFF Optional Reception Settings 16RCV Reduce Receive Reduce When Using Manual Sending and Receiving Substitute Reception into Memory Memory 0RX Data Transfer Data Transfer2FAX Number 1YES 1DATA Transfer Transmission Reservation Press the Broadcast key Broadcasting Press the appropriate Group key Broadcasting using a Group key Polling 8POLLING ModePolling Serial Polling 9SERIAL Poll ModePress the Menu key Press the Enter key 7MEMORY Poll Mode Setting up polling transmissionPolling Transmission Memory Polling Deleting originals from polling memory Adding a original to polling memory Press the Menu key Press the key or Key To select 1ON Restricting Polling Machines Polling Security1ON 12SECURITY Select Press the key or key to select 1SET and press the Enter key 4PASSCODE # Mode 1TIMER Mode Timer OperationsPress the key or key to select 1SET Enter the time at which transmission Canceling a Timer Transmission JOB 5ANTI Junk FAX Anti Junk FAX1ANTI Junk Select To store junk fax numbers, use the following procedure To clear junk fax numbers, use the following procedure Operation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports Troubleshooting Passcode List User Program List 6AUTO Listing Activity Report Auto ListingPress the key or key to select 1ON and press the Enter key 7PRINT Selection Printing Transaction Reports → Replace the TD cartridge Troubleshooting Audible Signals Messages and SignalsDisplay Messages Appendix Specifications Index Rspf Storing/settings Fax setupFaxes, sending and receiving Special functions Memo Memo Memo Avis Pour NOS Canada AR-FX13 Network Expansion KIT AR-NB2 a Safety Standards Trademark acknowledgments Introduction Contents PCL6 and PCL5e printer driver Software CD-ROM DiscPS printer driver PPD driver Sharpdesk CD-ROMs for Windows \Sadmin\Documents\EnglishA Operating system Windows MacintoshMac OS 9.0 to PPD driver Status button Connecting to a Network Program Settings factory Program name Additional user programs for Print modeExplanation Number Click the Printer Driver button Setup in a Windows Environment If you are using Windows Window confirming installation of the display fontsFollow the on-screen instructions Printer name window Click the Close button Installing the Printer Status Monitor p.15 Your operating system Sharing the Printer Using Windows Networking Click the Close button in the window If you are using Windows VistaStep If the shared printer does not appear Click the Close button in the window of step Click the Printer Status Monitor button Installing the PS Display Fonts Operating system PPD file path Using the PPD File Status, click the Auto Configuration button Configuring the Printer Driver V10.1.5 V10.2.8 V10.3.9 V10.4 Click the Continue button Double-click the Printer Setup Utility icon Click the Install buttonClick Add Select AppleTalk Configure the printer driver Select the machine configuration MAC OS 9.0 PPD file is installed Click the Setup button followedIf the above dialog box does not Appear and you return to AR-NB2 a AR-NB2 a Introduction Warranty Trademark Acknowledgments Contents Before Using the Network Scanner Function Click Help under the menu frame Open the Web browser on your computerClose the Web Menu frame Admin ModeSystem Information Scan Management When you have finished selecting the settings, click Submit Scan Mode settingsDescription Default setting Click Add below the scan list Description Storing destinations for Scan to E-mail Storing destinations for Scan to FTP FTP destination information Storing destinations for Scan to Desktop Scan to Desktop destination information Storing Groups Scan to E-mail For the settings, see the following tableStoring a group of destinations Click Destination in the menu frame of the Web Editing and deleting programmed transmission destinations Clock Adjust Passwords p.16Quick Setup p.15 Services p.15 Click Network Scanning in the menu frame Configure the Advanced Setup settingsSelect the transmission methods that you wish to use Set a limit for the size of image files Configuring Smtp and DNS server settings Configuring SMTP, DNS and Ldap server settingsConfigure the required parameters for that server Enter the required information in SMTP, DNS and Ldap When you have completed all entries Click Submit Enter passwords in User Password and Admin Password Clear key Press the Start key to begin scanning Sending an image by entering an e-mail address manually Press the Mode Select key to select scanner modeSelect Input Address and press the Enter key Search characters will Enter search characters and press the Enter key Scanning result Image Orientation and Standard Original Loading Orientation Viewer program used by the recipient does not support Problem Cause and solutionFormat of the received image data Destination was selected Error Code Solution Resolution Text original a Photo original B Important Points When Using Scan to E-MAIL Status button Checking the IP Address Network Scanner Tool Sharp Twain AR/DM Twain driver Sharpdesk CD-ROM for Windows Users Guides for Software Programs Double click the CD-ROM icon Click the start button and then click My ComputerFollow the instructions on the screen Double click Add or Remove Programs Click Control Panel in the start menuSharpdesk CD-ROM for Windows Specifications AR-NB2 a for network scanner Network expansion kit Online Manual Trademark Acknowledgments Introduction How to Control the Online Manual How to use the online manualUsing Bookmarks How to Print Out This Manual Contents Troubleshooting Wish to print Basic printingPrinter. If you need to change any print Cancel a print job When Paper Source is set to Auto SelectIf the tray runs out of paper during printing On Windows 98/Me, click the Setup tab Click the Start button, select SettingsPanel Click Printers and Other Hardware, and then Machine image Printer driver settings Print data Printing result Sided Book Sided Tablet Two-sided printing Printing result Print data Right Turning Pamphlet Pamphlet style Printing multiple pages on one Fitting the printed image to the paper Rotating the print image 180 degrees Printing a watermark How to Print a WatermarkPrint sample Printing text in black Printing text and lines/graphics in blackPrinting lines and vector graphics in black Printer utilities Before using the Printer Status Monitor Using the printer utilities Using the printer utilitiesStarting up the printer utilities Change the Printer Status Monitor settings as desired Changing the Printer Status Monitor settingsRight-click the Printer Status Monitor icon On the task bar, and select Preferences from On the task bar, and select Sharp Checking the printer statusStatus from the pop-up menu Click the Detail button Make sure that the correct printer is selected Configure print settings That you wish to printClick the Print button When Paper Feed is set to Auto Select About the Web pages How to access the Web page and view help 2System Information About the Web pages for users Directly printing a file in a computer Advanced job settings Configuring the printer condition settings 3Settings How to configure the settings Condition Settings Default Settings Printer condition setting menu Default Settings Printer condition settings PCL Settings PostScript Settings About the Web pages for the administrator Admin Password Click Passwords in the menu framePassword Submit Mail print function Setting up the E-mail print functionClick Print Port in the menu frame Copies Using the E-mail print functionTwo-sided print File type Key operator programs Configuring a setting in the key operator programs Key operator programs Interface settings Smtp setup Information setupClick Services in the menu frame Click Information in the menu frame Click Status Message in the menu frame Status message setupClick Submit to store the entered information Destination addresses and time schedule Click Alerts Message in the menu frame Alerts message setupEnter the destination addresses Check the connections Troubleshooting Windows Removing the softwareMacintosh Mac OS 9.0 to Network expansion kit memory*2 Printer specifications PPD Printer driver specifications Printer driver specifications Ropm Numerics Index