Sony AR-208S operation manual Troubleshooting, → Replace the TD cartridge

TROUBLESHOOTING

	Problem	Cause and solution	Page
		The telephone line cord is not correctly connected to the
Dialing cannot be done.		machine and the wall telephone jack.	11
		→ Make sure the telephone line cord is securely connected.
		The receiving machine is out of paper.	-
		→ Check with the operator of the receiving machine.
No transmission takes place.		The receiving machine does not support the G3 standard.	-
		→ Check with the operator of the receiving machine.
		An error is displayed.	91
		→ Check the display of the machine.
		If a blank sheet of paper is output together with a normally
Nothing is printed at the		received fax, the machine's paper size setting may be different
		from the size of paper actually loaded in the machine.	29
receiving end.
		→ Make sure that the paper size setting matches the size of paper
		loaded in the machine.
		Noise on the line may cause a distorted image. Try sending the
A distorted image is received at		fax again, or make a copy on your machine and see if the copy	-
the other end.		is distorted.
		→ If the image is still distorted, consult the retailer or dealer where
		you bought the machine.
		The transmitting machine may be using a light contrast setting.
The received original is faint.		→ Ask the operator of the transmitting machine to send the fax using	-
		a darker contrast setting.
		Noise on the line may cause a distorted image.
		→ Ask the operator of the transmitting machine to send the fax	-
		again.
Received images are distorted.
			Operation
		The TD cartridge may be running out of toner.	Manual
		→ Replace the TD cartridge.	(for general
			information)
Note	If your problem cannot be solved by carrying out the instructions in the Check and Remedy column above, please
	contact your authorized SHARP dealer.

90