Sony AR-208S operation manual Using the Rspf, Document feeder tray without trying, To force them

MAKING COPIES

Using the RSPF

• Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" and 14 lbs. to 24 lbs.

Note (56 g/m2 to 90 g/m2) can be used. A maximum of 50 pages can be placed at once.

•Straighten curled originals before placing them in the document feeder tray. Curled originals may cause misfeeds.

•Place originals horizontally.

•Before placing originals in the document feeder tray, be sure to remove any staples or paper clips from them.

•When a copy is made, the edges will not be copied (image loss). For the image loss, see the "SPECIFICATIONS" (p.82).

•When using the margin shift function, check the position of the margins carefully. (p.34)

1

2

Make sure that an original has not been left on the document	3
glass.
Adjust the original guides to the size
of the originals.

3	Place the original(s) face up in the	Original face up
	document feeder tray without trying
	to force them in.
	The RSPF indicator on the operation panel
	will light up. If this indicator does not light up,
	the originals are not properly set or the RSPF
	is not properly closed.
4	Select the number of copies and any other copy settings, and
	then press the [START] key ( ).

• The default output mode for copying from the RSPF is sort mode

Note (P.29), and a checkmark " " will automatically appear in the display (P.11). If "SORT AUTO SELECT" is disabled in the user programs, the default output mode will be non-sort mode. (P.57)

•To stop copying in the middle of a run, press the [CLEAR] key ().

•For the copy settings, see pages 23 through 35.

21