Sony AR-208S Problem Cause and solution Misfeed occur, Paper is not loaded properly

TROUBLESHOOTING AND MAINTENANCE

Problem	Cause and solution	Page
	Misfeed occur.
	→ To remove the misfeed, see "MISFEED	70
	REMOVAL".
	The paper is outside of the specified
	size and weight range.	14
	→ Use copy paper within the specified
	range.
	Paper curled or damp.
	→ Do not use curled or crimped paper.
	Replace with dry copy paper. During
	periods when the machine is not used	-
	for a long time, remove the paper from
	the tray and store it in a dark place in a
	bag to prevent moisture absorption.
	Paper is not loaded properly.
	→ Make sure that the paper is properly	15
Paper misfeed.	loaded.
	Pieces of paper inside machine.	71
	→ Remove all pieces of misfed paper.
	Too much paper is loaded in the tray.
	→ If the stack of paper is higher than the
	indicator line on the tray, remove some	15
	of the paper and reload so that the
	stack does not exceed the line.
	Some sheets of paper stick together.	15
	→ Fan the paper well before loading it.
	The guides on the bypass tray do not
	match the width of the paper.	18
	→ Adjust the guides to match the width of
	the paper.
	The bypass tray extension is not
	opened.	18
	→ When loading a large size of paper,
	open the extension.
			8
	The scanner glass for the RSPF is dirty.
White or black lines	→ Clean the long, narrow scanning	78
	window.
appear on copies.
	The transfer charger is dirty.	79
	→ Clean the transfer charger.

65