Important points when selecting an installation site | Sony AR-208S

CAUTIONS

Caution label on the machine

The label ( ) in the fusing area of the machine indicates the following:

: Caution, risk of danger : Caution, hot surface

Cautions on using the machine

Follow the cautions below when using this machine.

Warning:

•The fusing area is hot. Exercise care in this area when removing misfed paper.

•Do not look directly at the light source. Doing so may damage your eyes.

Caution:

•Place the machine on a firm, level surface.

•Do not install the machine in a humid or dusty location.

•When the machine is not used for a long time, for example during prolonged holidays, turn the power switch off and remove the power cord from the outlet.

•When moving the machine, be sure to turn the power switch off and remove the power cord from the outlet.

•Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it back on.

•Do not cover the machine with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the machine.

•Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

•The socket-outlet shall be installed near the machine and shall be easily accessible.

Important points when selecting an installation site

Do not install your machine in areas that are:

•damp, humid, or very dusty

•exposed to direct sunlight

•poorly ventilated

•subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater.

Be sure to allow the required space around the machine for servicing and proper ventilation.

8" (20 cm)

4"

(10 cm)

4"

(10 cm)

3

Image 5

Sony AR-208S Important points when selecting an installation site, Do not install your machine in areas that are

Contents

AR-208S AR-208D Checks Passports Drivers licenses For users in the USA Contents User Settings 20 cm 10 cm Important points when selecting an installation siteDo not install your machine in areas that are Environmental Information Software LicenseTrademark acknowledgements For users in the USA For users in Canada Safety Precautions Online Manual on the accessory CD-ROM Using the manualIntroduction Conventions used in this manual and online manual Enhanced copying features Main FeaturesHigh-speed laser copying High-quality digital image Color scanner function LCD panel displays messagesLaser printer function Part Names Preparations AR-208S Operation panel 100% 5x11 Display Power on Power on and OFF Power save modes Power offPreheat mode Auto power shut-off mode For best results, use only Sharp recommended paper Paper Special papers Follow these guidelines when using special papersLoading the Paper Tray Gently push the paper tray back into the machine Envelopes Important points when inserting paper in the bypass trayBypass Feed including special paper Open the bypass tray and extend the tray Loading paper in the bypass trayPress the Tray Select key to select the bypass tray Print face Follow these steps to change a trays paper size setting Changing a Trays Paper Size SettingSelect the tray, and then press Press the Menu key Normal Copying Using the document glassCopying books or originals with folds or creases This chapter explains basic copying functions Select the number of copies and any other copy settings, Using the RspfDocument feeder tray without trying To force them Original output tray extension Originals that cannot be used in the RspfCapacity of paper output tray Paper output tray extension Selecting the Tray Setting the number of copiesPress the Tray Select key Press the numeric keys to set the number of copies Making a Copy Darker or Lighter Fine adjustment of the ratio Selecting a preset ratioREDUCTION/ENLARGEMENT/ZOOM Copy will be delivered to the paper output tray AR-208D only Automatic TWO-SIDED Copying Using the document glass AR-208D only Press the Enter key Place the originals in the RSPF. p.21 Sort appears and then press When all originals have been scanned, press the keySort Copy Offset function during sort copy Place the originals. p.21If the memory becomes full 2IN1 appears and then press Copying Multiple Originals Onto a Single Sheet of Paper1 copy ORIG. Size Enter Copy is delivered to the paper output tray Place the originals. p.21 Press the E-SORT/SP.FUN key until Margin shift Creating Margins When CopyingPlace the originals Press the E-SORT/SP.FUN key until Margin Shift appears and then press Margin Shift on OFF MFP driver SoftwareSharpdesk Button Manager Hardware and software requirements Before InstallationWindows 98, Windows Me, Windows 2000 Professional*5 Windows XP*5, Windows Vista*5 Double-click the setup icon Installing the Software Follow the on-screen instructions Select Connected to this computer and click the Next button Installing the Software This completes the installation of the software When installing is finished, click the Close button Connecting a USB cable Select Connected via the network and click the Next button Using the machine as a shared printer Windows Vista, the Add Network Port button does not appear Click the Add Network Port buttonYou will return to the window of . Click the Close button Windows Vista, select Properties from the Organize menu Setting UP Button ManagerWindows XP/Vista Installing the Software Select Sharp AR-XXXX and click the Properties button Windows 98/Me/2000 Select Sharp Button Manager T Send to this application User programs p.58 System requirements for USB 2.0 Hi-Speed mode Basic Procedure for Printing Using the Printer ModeCanceling a print job Make sure that paper is loaded in the tray Scanning from the operation panel of the machine Using the Scanner ModeScanning Using the Keys on the Machine Button Manager scan menu Scanning from Your ComputerOperation in COPY, PRINTER, and Scanner Modes Click to read the online manual HOW to USE the Online ManualViewing the online manual User Programs Copy mode Except the Start key Can be used Use this setting to select Power shut-off mode, no keysLayout patterns When enabled, this function Job in printer mode Or increase when held down Use this setting to setYou can prevent settings from This sets the volume of beep Be adjusted separately for This is used to adjustFactory default setting To the factory default settings OFF Print mode Press the Menu key and then press the Enter key Selecting a Setting for a User ProgramChange the setting of the selected item Base setting beep Base settingsOne beep Invalid key beep Display Messages Indication Cause and remedy Lamp indicator Display Error Toner cartridge is not installedIndicator Steadily Service by an authorized Sharp Troubleshooting the Machine Paper Paper is outside of the specified Size and weight range Problem Cause and solution Misfeed occurPaper is not loaded properly Paper misfeed Memory FULL, Press Start to Machine is in auto power shut-off MFP driver cannot be installed Windows 2000/XP Problems During Setup of the SoftwareClick Performance and Maintenance, and then click System Click the start button and then click Control Panel Click the icon beside Universal Serial Bus controllers Plug and play screen does not appear Removing the software Install the software as explained in InstallingClick the icon beside Other Devices Misfeed Removal Misfeed in the paper feed area Misfeed in the fusing area See B Misfeed in the fusing area p.71 Lower the fusing unit release leverMisfeed in the transport area Open the front cover Document feeder cover Rspf jam release lever Misfeed in the Rspf Toner Cartridge Replacement Cartridge out while pressing the lock release lever Gently pull the tonerToner cartridge lock release lever Or 5 times Shutter Toner seal LockUnlock Scan Head Locking Switch Press the key or key to display the count of each function Maintenance RequiredChecking the Total Count Wipe the cabinet with a soft, clean cloth Cleaning the MachineCabinet Document glass and the back side of the Rspf Transfer charger Facsimile Expansion KIT AR-FX13 System ConfigurationNetwork Expansion KIT AR-NB2 a PS3 Expansion KIT AR-PK1N Interface cable Using the AR-D33 with the printer functionUSB interface cable Please purchase the appropriate cable for your computer Specifications Resolution Fusing systemPower supply Power consumption Printer Function Scanner Function Weight Paper weightSheet paper feed unit AR-D33 Paper size Material Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Transport Information Msds No. F-31601 Not toxic to aquatic organisms Dust explosion, like most finely divided organic powders Date Issued Nov.01 Msds No. F-31601 Index Symbols Problems during setup Power switchMisfeed removal Normal copying System configuration System requirements for USB Ready indicatorRemoving the software Roller rotating knob Tray Select key Connecting the computer Using convenient copy functionsTroubleshooting and maintenance Preparations Memo Memo For users in the USA Sharp Electronics Corporation AR-FX13 For users in the USA Introduction Important safety instructions Sharp Electronics Corporation FCC Notice to users Table of Contents Appendix Using the Rspf p.52 Memory transmission modeDirect transmission mode Using the document glass p.53 Sending a fax Dialing methods Storing a fax job while another job is in progress Selecting the reception mode p.63Sending a fax to multiple destinations Broadcasting p.71 RX Data Transfer List of FAX Functions Never Prints Middle OFF Memory Poll Mode Press the Mode Select key to select fax mode Selecting Settings for the FunctionSelect a setting or enter information Press the Menu key Online Manual on the CD-ROM Connecting the Telephone Line CordConnections Comments Connecting Other DevicesFinal Preparations Part Names Initial Settings Look AT the FAX Operation Panel Initial Settings Adjusting the Beep Volume Using the Arrow Keys 18RINGER Volume Adjusting the Ringing VolumePress the key or key to set the ringer volume 4USER Program 17BEEP Length Setting the Length of Alarm Beeps Press the key or key to set the alarm volume 19BEEPER Volume HOW to Enter Characters FAX Setup 3OWN Passcode SET 2ENTRY ModeEntering Your Name and FAX Number 2DATE&TIME SET Setting the Date and TimePress the Enter key Press the Menu key Press the key or key to select 112HOUR or 224HOUR 23DATE&TIME Format1TIME Format Press the key or key to select the display order 2DATE Format Press the key or key to select 1ON or 2OFF Daylight Saving Time Setting5DAY Light Saving Direct transmission the Memory indicator is off Selecting the Transmission ModeMemory transmission the Memory indicator is lit Selecting the Reception Mode Press a numeric key to select the number of rings # of Rings Auto # of Rings Manual Selecting the Reception Paper Size Press the key or key to select the tray selection Setting the Tray Selection25TRAY Selection Press the key or key to select the dial mode Setting the Dial Mode20DIAL Mode 8RECALL Times Busy Setting the Number of Recall TimesWhen the line is busy 9RECALL Times ERR When a communication error occurs Press the numeric keys to select the recall interval Setting the Recall Interval10RECALL INT. Busy 11RECALL INT. ERR 22INDEX Print Setting the Index Function 3RESO. Priority Setting Resolution PriorityPress the key or key to select the transmission resolution 15FAX Signal RCV Setting UP the Machine for USE with a PC Modem 14REMOTE Reception Using the Remote Reception Function Press the Menu key 13FAX Remote NumberPress a numeric key to enter the Fax Remote Number Press the key or key to select a ringing pattern Distinctive Ringing21DISTINCTIVE Ring Storing numbers Storing Numbers for Automatic DialingEnter the fax number with the numeric keys 1FAX Number To select the communication speed Press the key or key to select a Chain Dial settingEnter the name of the destination with the numeric keys Press the Menu key a number of times until you exit 2CLEAR 3GROUP KEY Storing Numbers Under Group Keys Enter Characters Enter a name for the Group Key with the numeric keys 2END 1FAX # Enter the numbers that you wish to delete 6A.M. Mode Using the Machine with AN Answering MachineQuiet Detect Time 1QUIET Detect Time 2AUTO Receive Answering Machine BackupIf Quiet Detect Time is not working properly When using the Rspf Size and WeightWhen using the document glass Originals Suitable for Faxing Unsuitable Originals Adjust the original guides to the width of your originals Setting the OriginalSending Originals There are two ways to send the fax Gently close the Rspf MarkPress the Start key Press the # key Original Size Optional Transmission Settings1DOC. Glass Size Press the key or key to select the original size Contrast Resolution 1COVER Sheet SET Cover Sheet Press the key or key to select a message Message Function2TX Message SET Place the originals in the Rspf TWO-SIDED Original Transmission Function Direct Keypad Dialing Dialing and TransmittingRapid KEY Dialing Speed Dialing Dial the fax number of the receiving machine Normal Dialing Using the Speaker KEYChain Dialing Press the REDIAL/PAUSE key Press the Start key Using the Search KEYRedialing 3MEMORY Status Canceling Deleting a Stored FAX JOBIf the Memory Becomes Full While Scanning AN Original Using MAN. Mode Using Auto ModeUsing A.M. Mode Receiving Faxes Sided RX Press the key or key to select 1ON or 2OFF Optional Reception Settings 16RCV Reduce Receive Reduce When Using Manual Sending and Receiving Substitute Reception into Memory Memory 2FAX Number Data Transfer0RX Data Transfer 1YES 1DATA Transfer Transmission Reservation Press the Broadcast key Broadcasting Press the appropriate Group key Broadcasting using a Group key Polling 8POLLING ModePolling Press the Menu key Press the Enter key 9SERIAL Poll ModeSerial Polling Polling Transmission Memory Polling Setting up polling transmission7MEMORY Poll Mode Deleting originals from polling memory Adding a original to polling memory Press the Menu key Press the key or Key To select 1ON Restricting Polling Machines Polling Security1ON 12SECURITY Select Press the key or key to select 1SET and press the Enter key 4PASSCODE # Mode 1TIMER Mode Timer OperationsPress the key or key to select 1SET Enter the time at which transmission Canceling a Timer Transmission JOB 1ANTI Junk Select Anti Junk FAX5ANTI Junk FAX To store junk fax numbers, use the following procedure To clear junk fax numbers, use the following procedure Operation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports Troubleshooting Passcode List User Program List Press the key or key to select 1ON and press the Enter key Activity Report Auto Listing6AUTO Listing 7PRINT Selection Printing Transaction Reports → Replace the TD cartridge Troubleshooting Display Messages Messages and SignalsAudible Signals Appendix Specifications Index Rspf Storing/settings Fax setupFaxes, sending and receiving Special functions Memo Memo Memo Avis Pour NOS Canada AR-FX13 Network Expansion KIT AR-NB2 a Safety Standards Trademark acknowledgments Introduction Contents PCL6 and PCL5e printer driver Software CD-ROM DiscPS printer driver PPD driver Sharpdesk CD-ROMs for Windows \Sadmin\Documents\EnglishA Operating system Windows MacintoshMac OS 9.0 to PPD driver Status button Connecting to a Network Program Settings factory Program name Additional user programs for Print modeExplanation Number Click the Printer Driver button Setup in a Windows Environment If you are using Windows Window confirming installation of the display fontsFollow the on-screen instructions Printer name window Click the Close button Installing the Printer Status Monitor p.15 Your operating system Sharing the Printer Using Windows Networking Click the Close button in the window If you are using Windows VistaStep If the shared printer does not appear Click the Close button in the window of step Click the Printer Status Monitor button Installing the PS Display Fonts Operating system PPD file path Using the PPD File Status, click the Auto Configuration button Configuring the Printer Driver V10.1.5 V10.2.8 V10.3.9 V10.4 Click the Continue button Click Add Click the Install buttonDouble-click the Printer Setup Utility icon Select AppleTalk Configure the printer driver Select the machine configuration MAC OS 9.0 PPD file is installed Click the Setup button followedIf the above dialog box does not Appear and you return to AR-NB2 a AR-NB2 a Introduction Warranty Trademark Acknowledgments Contents Before Using the Network Scanner Function Close the Web Open the Web browser on your computerClick Help under the menu frame Menu frame Admin ModeSystem Information Scan Management When you have finished selecting the settings, click Submit Scan Mode settingsDescription Default setting Click Add below the scan list Description Storing destinations for Scan to E-mail Storing destinations for Scan to FTP FTP destination information Storing destinations for Scan to Desktop Scan to Desktop destination information Storing a group of destinations For the settings, see the following tableStoring Groups Scan to E-mail Click Destination in the menu frame of the Web Editing and deleting programmed transmission destinations Clock Adjust Passwords p.16Quick Setup p.15 Services p.15 Click Network Scanning in the menu frame Configure the Advanced Setup settingsSelect the transmission methods that you wish to use Set a limit for the size of image files Configuring Smtp and DNS server settings Configuring SMTP, DNS and Ldap server settingsConfigure the required parameters for that server Enter the required information in SMTP, DNS and Ldap When you have completed all entries Click Submit Enter passwords in User Password and Admin Password Clear key Press the Start key to begin scanning Select Input Address and press the Enter key Press the Mode Select key to select scanner modeSending an image by entering an e-mail address manually Search characters will Enter search characters and press the Enter key Scanning result Image Orientation and Standard Original Loading Orientation Viewer program used by the recipient does not support Problem Cause and solutionFormat of the received image data Destination was selected Error Code Solution Resolution Text original a Photo original B Important Points When Using Scan to E-MAIL Status button Checking the IP Address Network Scanner Tool Sharp Twain AR/DM Twain driver Sharpdesk CD-ROM for Windows Users Guides for Software Programs Follow the instructions on the screen Click the start button and then click My ComputerDouble click the CD-ROM icon Sharpdesk CD-ROM for Windows Click Control Panel in the start menuDouble click Add or Remove Programs Specifications AR-NB2 a for network scanner Network expansion kit Online Manual Trademark Acknowledgments Introduction How to Control the Online Manual How to use the online manualUsing Bookmarks How to Print Out This Manual Contents Troubleshooting Printer. If you need to change any print Basic printingWish to print If the tray runs out of paper during printing When Paper Source is set to Auto SelectCancel a print job On Windows 98/Me, click the Setup tab Click the Start button, select SettingsPanel Click Printers and Other Hardware, and then Machine image Printer driver settings Print data Printing result Sided Book Sided Tablet Two-sided printing Printing result Print data Right Turning Pamphlet Pamphlet style Printing multiple pages on one Fitting the printed image to the paper Rotating the print image 180 degrees Print sample How to Print a WatermarkPrinting a watermark Printing lines and vector graphics in black Printing text and lines/graphics in blackPrinting text in black Printer utilities Before using the Printer Status Monitor Starting up the printer utilities Using the printer utilitiesUsing the printer utilities Change the Printer Status Monitor settings as desired Changing the Printer Status Monitor settingsRight-click the Printer Status Monitor icon On the task bar, and select Preferences from On the task bar, and select Sharp Checking the printer statusStatus from the pop-up menu Click the Detail button Click the Print button Configure print settings That you wish to printMake sure that the correct printer is selected When Paper Feed is set to Auto Select About the Web pages How to access the Web page and view help 2System Information About the Web pages for users Directly printing a file in a computer Advanced job settings Configuring the printer condition settings 3Settings How to configure the settings Condition Settings Default Settings Printer condition setting menu Default Settings Printer condition settings PCL Settings PostScript Settings About the Web pages for the administrator Admin Password Click Passwords in the menu framePassword Submit Click Print Port in the menu frame Setting up the E-mail print functionMail print function Copies Using the E-mail print functionTwo-sided print File type Key operator programs Configuring a setting in the key operator programs Key operator programs Interface settings Smtp setup Information setupClick Services in the menu frame Click Information in the menu frame Click Status Message in the menu frame Status message setupClick Submit to store the entered information Destination addresses and time schedule Enter the destination addresses Alerts message setupClick Alerts Message in the menu frame Check the connections Troubleshooting Macintosh Mac OS 9.0 to Removing the softwareWindows Network expansion kit memory*2 Printer specifications PPD Printer driver specifications Printer driver specifications Ropm Numerics Index