Sony AR-208S operation manual Sending an image by entering an e-mail address manually

USING THE NETWORK SCANNER FUNCTION

TRANSMISSION METHODS FOR SCAN TO E-MAIL

The e-mail address for a Scan to E-mail transmission can be entered manually or selected from e-mail addresses stored on an LDAP server.

Sending an image by entering an e-mail address manually

1 Press the [MODE SELECT] key to select scanner mode.

The "SCAN" indicator lights up to indicate that scanner mode is selected.

2 Place the original in the document feeder tray or on the document glass.

For information on how to place the original, see

"IMAGE ORIENTATION AND STANDARD

4 Enter the destination e-mail address and press the [ENTER] key.

To enter characters, see

"HOW TO ENTER

INPUT ADDRESSCHARACTERS" (p.20). XXX@XX.XXX.com

2

5 Press the [] key () or [] key () to select the original size and then press the [ENTER] key.

ORIGINAL LOADING ORIENTATION" (p.20).

3 Select "INPUT ADDRESS" and press the [ENTER] key.

	If "INPUT ADDRESS"
	does not appear, make
SCAN USING:	sure that "Scan to ad-hoc
INPUT ADDRESS	E-mail" is enabled in the
	Web page (p.14).

ORIG. SIZE ENTER 8.5X11

The original size changes as follows each time the [] key () or [] key () is pressed: "8.5x11"→"8.5x5.5" →"A4"→"B5"→"A5" →"8.5x14"→"8.5x13".

6 Press the [START] key () to begin scanning.

The original is scanned using the settings of

Note	the scan mode that has the "Default Scan
	Mode" checkbox selected.

- 18 -