Sony AR-208S This is used to adjust, Exposure level, Be adjusted separately for, Is pressed when

					USER SETTINGS
Program		Setting codes
	Program name	(factory default			Explanation
number		setting appears
		in bold)
			•	This is used to adjust the
		1: SPF/RSPF		exposure level.
		(Adjustment to	•	The automatic exposure level can
		5 levels is		be adjusted separately for the
		possible.)		document glass and the RSPF.
19	AE LEVEL ADJUST	2: DOCUMENT
			• For the procedure for adjusting
		GLASS
				the exposure and guidelines
		(Adjustment to
		5 levels is		for numeric values, see page
		possible.)		24. The factory default setting
				for the exposure level is center.
		1: AMERICAN
		ENGLISH	•	This is used to set the
20	LANGUAGE	2: ENGLISH
				language used in the display.
		3: FRENCH
		4: SPANISH
21	RESET FACTORY	1: YES	•	This is used to return all settings
		2: NO		to the factory default settings.
22	SORT AUTO	1: ON	•	Use this setting to enable or
	SELECT	2: OFF		disable sort auto select mode.
			• You can set the operation that
				takes place if the [START] key
24	CHECK RSPF	1: ON		(	) is pressed when the
	OPEN	2: OFF		RSPF is not completely closed.
				(For details on the "Check RSPF
				open function", see page 13.)
			•	Set the allowed paper sizes
				for copying from the bypass
25	VALID COPY	1: 8.5x11		tray. When "5.5x8.5" is
	WIDTH	2: 5.5x8.5		selected, a copy of a letter
				size original will only be
				printed up to invoice size.
			• Select whether copying is only
28	LSU SETTING	1: ON		allowed when the polygon
		2: OFF		motor is rotating, or also when
				the polygon motor is stopped.
			•	Set the temperature of the
29	PAPER TYPE	1: PLAIN PAPER		fusing unit when the bypass
		2: HEAVY PAPER		tray is used. Normally "PLAIN
				PAPER" should be selected.
		1: LIGHTER
	DISPLAY	2: LIGHT	•	Set the contrast of the display.
30		3: NORMAL
	CONTRAST
		4: DARK
		5: DARKER

7

57