Hafler MAQ-104 owner manual Specifications

SPECIFICATIONS

The MAQ-104 is deliberatdy restricted to 12 dB of boost or cut per band. This is meant to discourage attempts to correct large system response problemswith the equalizer. System response errors greater than about 6 dB over a span of an octave or more should be corrected elsewhere

in the system, by correcting speaker or amplifier problems. Excessive use of equalization is likely to overdrive amplifiers, speakers, or other components.

INPUTS

Input Level = 750mV RMS

Input Impedance = 20K Ohms

OUTPUTS

Output Level = 750 mV RMS

ELECTRICAL

Output Impedance =500 Ohms

Distortion = Less than .01% THD + N

Signal to noise ratio		=	over	90	dB	(A-weighted)
Filter Q = 2 typical
Power Required = less			than 1	amp		at 12 volts typical.
PHYSICAL
Dimensions	= 8.000H	x	10.125W		x	1.75D.
Weight = 3	Ibs.

11