Hafler TRM6.1 manual Qualified Service Personnel Only, Wave Guide Assembly, Tweeter Replacement

Qualified Service Personnel Only

TWEETER REPLACEMENT

1.Remove (4) screws from wave guide using a 3/32" Allen Wrench

2.Remove wave guide assembly from enclosure

3.Disconnect the LED harness (FIG. 1)

4.Disconnect the (2) speaker wires from the tweeter (FIG. 2)

5.Disconnect the (2) power switch wires (FIG. 3)

6.Unclip the tweeter from wave guide (4 catch fingers)

7.Position the replacement tweeter into wave guide

8.Snap the tweeter into wave guide

9.Follow steps 1-5 in reverse order to install wave guide assembly

CAUTION: Reconnect wires as indicated in each diagram! Wave Guide Assembly

FIG. 1	FIG. 2	FIG. 3
LED Harness	Tweeter Replacement #SPK10424	Power Switch

WOOFER REPLACEMENT

1.Remove (4) screws from woofer using a 3/32" Allen Wrench

2.Remove woofer from enclosure

3.Disconnect (2) speaker wires (FIG. 4)

4.Follow steps 1-3 in reverse order to install new woofer

CAUTION: Reconnect wires as indicated in each diagram!

FIG. 4

Woofer Replacement

– 24 –