Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control.
Power on/off
DC Standby Button
Connect/disconnect to the power
1.Connect the power supply wire, then press the Power Switch button and the red power indicator will light, in several seconds the picture will appear on the screen.
2.If the TV is in the state of standby, press the 
button on the remote control.
NOTE
1.You can also press the
status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can
complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page
2.When you do not use the remote control, you can directly press the the button on the television to call off the standby status.
3.Press the 
button on the remote control to get into the standby state.
4. Press the |
| button on the TV set to |
|
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal , 
screen protection works, and ,in 15 minutes later, it will change into standby status.
