Tuning
There are three ways of searching: automatic search, manual search and MFT (manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about the remote control.
Automatic search
Automatic search
| CH+ |
|
VOL- | MENU | VOL+ |
| CH- |
|
1.Press MENU button continuously until select TUN menu.
2.Press CH+/- button to move the indicator to AUTO MEMORY.
TUN
POS. EDIT POS. EX.
SEARCH UP AUTO MEMORY
TUN
POS. EDIT POS. EX.
SEARCH UP AUTO MEMORY
3.Press VOL+ button, then AUTO MEMORY mode will work. The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel.
ASM | U | 0 |
STOP |
|
|
CH+
VOL- MENU VOL+
CH-
If you want to stop the search, just press VOL- button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed.
After searching
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel, it may be the color system has not been set properly, so you should adjust it to the proper system (Reference to page 7).
