Power On and Power Off

Below are methods on how to power on/off the TV set with the switch on the TV and

on the remote control.

Power on/off

Power switch

¢Û

¢PowerÙ indicator

¢Ú

Menu

¢Ü

TV/AV switch

¢ß

Channel down/up

Volume down/up

¢Ý¢Þ

DC Standby Button

Direct-digit Choosing Button

Connect/disconnect to the power

1.Connect the power supply wire, then press power switch button, the power indicator will light, in several seconds the picture will appear on the screen.

2.If the TV is in the state of standby, press the button on the remote control.

NOTE

1. You can also press the 0-9 button to call off the standby

status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can

complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 11-14).

2.When you do not use the remote control, you can directly press the CH+/- button on the television to call off the standby status.

3.Press the button on the remote control to get into the standby status.

4.Press the button on the TV set to completely turn off the TV.

Page 7
Image 7
Haier 29FA10-AM owner manual Power On and Power Off, Power on/off, Connect/disconnect to the power