16 Plasma TV
Turning on the TV just after installation.
1. Connect power cord correctly.
2. Press the SWITCHbutton on back of the TV. At this moment, theTV is switched to standby mode.
Press the POWERbutton on the remote control or button on the TV and then the TV will turn on.
* In this manual, the OSD (On Screen Display) may be different from your `s, because it is just
an example to help you with the operation.
TV
TV
1. If the TV was turned off with the SWITCH button on the TV
Press the SWITCH button on the TV to turn the TV on.
2. If the TV was turned off with the remote control and then the ON/OFF switch on the back of the TV.
Press the SWITCH button on the back of TV and then press the POWER button on the remote control to turn
the TV on.
NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
TV

Turning on the TV

Choose the Menu Language

When you start using your set for the first time, you must select the Menu Language which will be used for displaying
menus and indications.
Menu Language English
OSD Timeout 15seconds
Menu Background Translucent
Calendar
Auto Off Off
BlueScreen Off
Close Caption Off
Parental
B
C
A
1Press MENUand then use VOL+/-button to select the
FUN.Menu.
2PressCH+/-button to select Menu Language.
3Select a particular Menu Language by pressing VOL+/- button
repeatedly. You can choose one of three Menu Languages.
(English, French, Spanish)
4When you are satisfied with your choice, press the EXITbutton to
return to normal viewing.

Choose the Input Source

- Change the picture source so that you can watch your TV, cable TV, VCR, DVD, or any other devices that are
connected to your TV.
1. Press INPUT button on the remote controller, the Scoure menu will appear on the screen.
2. Press CH+/-button for option and then press VOL+/- button to confirm.
Note:
If AV1 and S-Video are inserted at the same time, priority will be given to S-Video.
Source
TV
AV1/S-Video
YPbPr/YCbCr
VGA
DVI