About the fridge storage compartment
Use of the foldaway shelf
Fig. shows the extended state of the foldaway shelf in which you can put lower food containers.
Fig. shows the folded state of the foldaway shelf in which you can put higher food containers.
To fold the shelf from state to state , simply push structure A upwards, and push structure B inward in the direction of the arrow shown in the figure.
To extend the shelf from state to state , push structure A upwards, and pull structure B in the direction of the arrow shown in the figure.
Use of the wire wine holder
Fig. shows the folded state of the wire wine holder. In this state large space can be spared.
Fig. shows the extended state of the wire wine holder. In this state it can hold various wines.
To extend it from state to state , simply pull the wire down.
To fold it from state to state , simply push the wire up.
Preparation prior to use
Connection to power supply
When the refrigerator is connected to power supply, the fridge temperature and freezer temperature are automatically set to 5 and
Operation modes of the refrigerator
Manual adjustment mode: can set temperature by pressing the temperature setup key (see “Function description” hereafter).
Loading the refrigerator with food
Load the refrigerator with food after it has been operates for a period and the inside is cool enough.
make sure to keep the two ends of a shelf on the same level.
Otherwise it may fall or the food on it may dump.
Note
Recommended storage areas for various foods As cold air circulates inside the refrigerator, there is temperature difference inside the fridge storage
compartment. Different foods should be placed in different areas according to their properties. Eggs, butter, cheese and etc.
Drinks, canned food and etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc Cooked meat, fresh fish and meat, etc.
Fruit, vegetables, salad, etc.
Lamp in the fridge storage compartment and its replacement
Parameters of the lamp: 12V, max 5W(the power depends on the model). The lamp adopts LED as its light source, featuring low energy consumption and long service life. If there is any abnormality, please contact the
Note
Some time will be required for the refrigerator to reach the set temperature when the setting is changed. The length of this period depends on the difference between the existing and set temperatures, ambient temperature, door opening frequency and the amount of food in storage.
16 | 9 |