Air Conditioner | Edition:2006/1/10 | |
|
|
|
Operation
Dry Operation
Remote controller | 1. Unit start | ||||||||||||
|
|
| Press ON/OFF on the remote controller, unit starts. | ||||||||||
|
|
| 2.Select operation mode | ||||||||||
|
|
| Press MODE button. For each press, operation mode | ||||||||||
|
|
| |||||||||||
|
|
| changes as follows: | ||||||||||
|
|
| |||||||||||
|
|
| Remote controller: | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER/SOFT
COOL operation starts when room | ||
temp.is higher than temp.setting. | ||
|
Temp.setting+2oC
Temp.setting
On reaching temp.setting +2oC unit will run in mild DRY mode.
AUTO COOL DRY FAN HEAT
Then Select DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting increase 1oC,if kept depressed, it will increase rapidly
Every time the button is pressed, temp.setting decrease 1oC,if kept depressed, it will decrease rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
Remote controller:
LOW MED | HI | AUTO |
Air conditioner is running under displayed fan speed. In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently at LOW speed regardless of FAN setting.
5.Unit stop
Press ON/OFF button, the unit stops.
18
