Air Conditioner | Edition:2006/1/10 | |
|
|
|
Operation
Timer On/Off Operation
Remote Controller
POWER/SOFT
Set clock correctly before starting TIMER operation.
1.After unit starts, select your desired operation mode.
2.Timer mode selection
Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: Remote controller:
BLANK
TIMER ON TIMER OFF | TIMER |
Then select your desired TIMER mode (TIMER ON or
TIMER OFF). " 
"or "
"will flash.
3.Time setting
Press HOUR | button. |
Every time the button is pressed, time setting | |
increases 1 min, if kept depressed, it will increase rapidly.
Every time the button is pressed, time setting decreases 1 min, if kept depressed, it will decrease rapidly.
It can be adjusted within 24 hours.
4.Confirming your setting
After setting correct time, press SET button to confirm
" 
"or" 
"on the remote controller stops flashing. Time displayed: Unit starts or stops at x hour x min. (TIMER ON or TIMER OFF).
5.Cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints:
After replacing batteries or a power failure happens, time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if time setting is the same as previous one.
23
