Switch on/ off the TV set
In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained.
Switch on/ off the TV set
Infrared | receiver |
Power indicator | Power switch |
Channel position up/down | |
Volume up/ down |
|
MENU |
|
| TV/Video |
| (input selector |
POWER | |
Switch on/ off the TV set
1.Connect the power supply wire. Then press the power
switch button, the power indicator will light, in several
seconds the picture will display on the screen.
2.If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote control.
Note:
1.Press the P+/- buttons which is on the TV set to get out of the standby state when the remote control is not in use.
3
B/G
144MHz
NORMAL
2.Press the POWER button on the remote control to the standby mode.
3.Press the power button on the TV set to completely power off the TV.
4.To eliminate the magnetization completely, the TV set degausses automatically. There is the sound ofPENG, it is natural.
Automatic stand by function
When the SCREEN SAVER is ON, If no signal has been received, and after five minutes, it will stand by automatically. If the SLEEP has been used, the SLEEP function is priority. When the SCREEN SAVER is OFF, the Automatic stand by function is no available.
When it is AV status, the TV set will enter the screen saver, after 5 minutes turn to stand by automatically .
