Washing dishes

EN

 

 

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example:

Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard.

Earn savings

If only a small number of dishes have been loaded into the dishwasher,select- ing a programme that operates at the next lowest temperature will usually be sufficient.

Programme data

The stated programme data are based on standard operating conditions. The values can vary considerably according to:

different amounts of dishes

temperature of mains water supply

pressure of mains water supply

ambient temperature

fluctuations in mains voltage

machine-related factors (e.g. temperature, water volume,...)

Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only.The water consumption values are related to water hardness level 1.

Switching the dishwasher ON

Turn on the tap.

Set ON-OFF button “ A ” to ON. All the programme indicators“C1,C2,C3, C5,C6”light .

Press programme button “B1”,programme indicator “C1” blinks.

If the door is closed, after 5 seconds, the programme indicator “C1” bcomes to light and the dishwasher beeps one time, then the programme starts automatically.

End of programme

Six beeps will indicate that the wash cycle has finished and all the programme indicators light.

Switching the dishwasher OFF

Several minutes after the programme has ended:

Set main switch “A” to OFF.

Open the door .

Turn the water tap off. (Does not apply when Aquastop unit has been fitted)

Remove dishes, etc. when they have cooled down.

Interrupping the programme

Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully until spray arm has stopped rotating. When you open the door, the dishwasher will beep ten times every thirty seconds.

If the appliance has already heated up or the hot water was switched ON and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may open due to expansion.

Cancelling or modifying a cycle

A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, “ Loading the detergent ”).

To modify a cycle that is already underway, press the button“A ” , all of the settings will be cancelled. To set a new cycle, follow the instructions con- tained in the paragraph entitled “Switching the dishwasher ON”.

C1 C2 C3 C5 C6

AB1

How to keep your dishwasher in shape

After Every Wash

After every wash, turn off the water supply (not necessary for models with “Aquastop” ) the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

Remove the plug

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.

No solvents or Abrasive Cleaning Products

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth damp- ened with water and a little while vinegar, or cleaning product made specifically for dishwashers.

Moving the Appliance

If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is food that re- mains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.

The door should not be left in the open position since this could present a

tripping hazard.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

8

Page 9
Image 9
Haier DW12-PFE1 S, DW12-PFE1 ME manual Washing dishes, How to keep your dishwasher in shape

DW12-PFE1 S, DW12-PFE1 ME specifications

The Haier DW12-PFE1 ME and DW12-PFE1 S are both innovative dishwashers designed to enhance kitchen functionality with their advanced features and technology. These models stand out in the crowded appliance market, offering performance, versatility, and convenience for modern households.

One of the key features of the DW12-PFE1 is its large capacity. With the ability to accommodate up to 12 place settings, it provides ample space for all your dishes, cutlery, and cookware. This makes it particularly suitable for families or for those who love to entertain guests. The adjustable racks and folding tines offer flexibility to optimize loading configurations based on your needs, ensuring that no item goes unwashed.

Both models are equipped with a highly efficient energy system, which not only conserves energy but also reduces water consumption. Operating at a low noise level, both dishwashers ensure a quiet environment, allowing you to enjoy your leisure time without disturbances during operation. The eco-friendly design adheres to energy efficiency standards, making these dishwashers an environmentally responsible choice.

In terms of washing performance, the Haier DW12-PFE1 ME and S models boast multiple wash programs to cater to different cleaning needs. From intensive cycles for heavily soiled pots and pans to quick washes for lightly soiled dishes, users can easily select the desired program for optimal results. The innovative soil sensor technology adjusts the wash cycle duration and intensity based on the level of dirt detected, ensuring thorough cleaning while conserving resources.

Both models feature a delay start option, enabling users to set the dishwasher to begin its cycle at a more convenient time. This feature is particularly useful for those who want to take advantage of off-peak electricity rates or wish to have dishes cleaned overnight.

Safety is also a priority with these dishwashers. They are equipped with a child lock feature to prevent accidental operation, plus overflow protection to minimize the risk of leaks. The sleek design and stainless-steel finish provide a modern aesthetic that can seamlessly fit into any kitchen decor.

In summary, the Haier DW12-PFE1 ME and DW12-PFE1 S dishwashers are versatile, energy-efficient, and user-friendly appliances, making them ideal for today's busy lifestyles. With their ample capacity, advanced cleaning technology, and safety features, they promise to deliver an excellent dishwashing experience while enhancing kitchen convenience and efficiency.