17
Cancelling or modifying a cycle
A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the
detergent may have already been used, and the appliance may have already drained t he was h water.
If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, “ Loading the
detergent ”).
To modify a cycle that is already underway, press the button“ A ” , all of the settings will be cancelled.
To set a new cycle, follow the instructions contained in the paragraph entitled “Switching the dish-
washer ON”.
If the the door is closed, after 5 seconds the delayed start indicator “ E ” lights , the t ime -rem aining
indicator “ F ” will blink and decrease , the programme will start until the delayed start indicator “ F ”
goes out .
B
C
A
1/2 Load Button
This button (see" Close-up View (Cont r ol P ane l), letter " B ") makes it possible to wash dishes using only
the upper rack if there ar e not enough dishes for a full load . This wi ll allow you to save on water an d
energy consumption.

To select 1/2 load:

Select the programme ( see the paragraph entitled“ Switching the dishwaher ON”)
Press the 1/2 load button “ B ” , 1/2 load indicator “ C ” blinks.
If the door is closed, after 5 seconds, the programme starts automatically.
- Please keep in mind that the amount of detergent should also be adapted to the 1/2 load.
- To cancel the 1/2 load, you can press the 1/2 load button “ B ” again ,until the 1/2 load indicators
“ C” goes out.