Food Storage Basket
• Your freezer have removable baskets. It allows you
to store food more accessably or you can remove it if not needed.
Castors
Your freezer can be equipped with castors for easy moving. We recommend installing castors before using the freezer. Install following these easy steps:
1.Remove the food basket from the freezer 2.Slowly tilt the freezer on its side.
3.Tap one castor into the bottom of the freezer. Fasten the castor into place with screws provided.
4.Install the other three castors in the same manner.
5.Return the freezer to its upright position and replace the food basket.
Note: it is important to wait for 24 hours after installation before plugging in the unit to alow the refrigerant to stabilize
Installing Your Freezer
Unpacking Your Freezer
1.Remove all packaging material. This includes the foam base and all adhesive tape holding the freezer accessories inside and outside.
2.Inspect and remove any remains of packing, tape or printed materials before powering on the freezer.
Adjusting Your Freezer
•Your freezer is designed for freestanding installation only. It should not be recessed or
•Place the freezer on a floor strong enough to support it fully loaded.
•When moving the freezer, never tilt it more than a
•If the freezer is tilted let it stand in an upright position for at least 24 hours prior to plugging. This is to allow the refrigerant to settle.
Proper Air Circulation
• To assure your freezer works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation, plumbing and electrical connections.
• The following are recommended clearances around the deep freezer:
Sides | 100mm |
Top | 100mm |
Back | 100mm |
8 | 5 |
