Haier FCD-360, FCD-290 manual Operation

Models: FCD-290 FCD-360

1 8
Download 8 pages 11.97 Kb
Page 2
Image 2
Operation

Operation

Power supply

30 minutes later the appliance is turned on, the temperature inside the appliance will drop significantly.

Temperature adjustment

The temperature in the appliance can be adjusted by turning the thermostat clockwise or anticlockwise accordign to the ambient temperature and the food in storage. The thermostat dial has the scales from 1 to 6. The digits of the scales do not indicate specific temperature, but the changes of temperature in the appliance. Scale 1 represents highest and scale 6 the lowest temperature, In most cases, the thermostat is set to scale 3 or 4. Position closer to scale 1 is recommended in summer. If the thermostat is set at scale 5 in summer, the compressor will not stop. In winter , turn the thermostat clockwise to increase the temperature in the appliance.

When fast freezing is intended, set the thermostat to position "6" Reset the thermostat when desired temperature is reached. Ensure that the thermostat is properly set before using the appliance and try not to reset the thermostat unless it is necessary.

Loading the food

Wait for a while (3 hours in summer and 2 hours in winter) before loading the food in the freezer.

Door lock

Completely insert the key to the lock and turn the key clockwise or anticlockwise 180o to lock or unlock the door.

Caution: Some time is needed before the reset temperature is reached.The length of this period is determined by the extent of temperature changes, ambient temperature, frequency of door opening and amount of food in storage.

13

Page 2
Image 2
Haier FCD-360, FCD-290 manual Operation