Whirlpool WHES40 operation manual Specifications & Dimensions

Specifications & Dimensions

		Model WHES40
Model Code		LL40
Rated Softening Capacity (Grains @ Salt Dose)		11,900 @ 2.4 lbs.
		31,600 @ 9.0 lbs.
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose)		40,000 @ 15.5 lbs.
		4,958 @ 2.4 lbs.
Water Used During Regeneration @ Minimum Salt Dose		3.0 gal./1,000 grains
Total Water Used Per Regeneration @ Maximum Salt Dose		37.1 gallons
Rated Service Flow Rate		8.5 gpm
Amount of High Capacity Ion Exchange Resin		1.14 cu. ft.
Pressure Drop at Rated Service Flow		11.0 psig
Water Supply Max. Hardness		125 gpg
Water Supply Max. Clear Water Iron		10 ppm*
Water Pressure Limits (minimum / maximum)		20 - 125 psi**
Water Temperature Limits (minimum / maximum)		40 - 120 °F
Minimum Water Supply Flow Rate		3 gpm
Maximum Drain Flow Rate		2.0 gpm
Salt Storage Capacity		200 lbs.
*Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin
requires additional treatment if water supply contains clear water iron exceeding 5 ppm.
**Canada working pressure limits: 1.4 - 7.0 kg/cm2.
These systems conform to NSF/ANSI 44 for the specific performance claims as verified
and substantiated by test data.
The efficiency rating is only valid at the stated salt dose. These softeners were efficiency
rated according to NSF/ANSI Standard 44.
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration
time based on the amount needed.
19”
IN
3-3/4”	18”
OUT

IN – OUT
41-1/2”	47-7/8”
	39-1/2”

FIG. 1

Questions? Call Toll Free 1-866-986-3223 Monday- Friday, 8 AM - 7 PM EST

or visit www.ecodynewatertreatment.com

When you call, please be prepared to provide the model, date code and serial number, found on the rating decal, typically located on the rim below the salt lid hinges.

3