Contents
Before usage |
|
Features |
|
Parameters |
|
Dimension figure |
|
Schematic diagram |
|
Installlation |
|
Installation | 4 |
Usage | 5 |
Attention |
|
FAQ * After service |
|
FAQ | 6 |
Packing list | 6 |
See to the physical product for the appearance, color or pattern.
After installation, be sure to fill the tank with water before switching on the power. The receptacle of water heater shall be set to places beyond the water spraying. Never plug or pull the power plug with wet hand. If the power cord is damaged, be sure to have it replaced by appointed maintenance.
In cold area, if the water heater is idle for long period in winter, please pull the safety valve to discharge the water to avoid freezing.
The shell of the water heater is all plastic. To clean the shell, please wipe it gently with wet cloth and neutral detergent. Do not use petrol or other solvent.
In case of breakdown, please contact us or the appointed maintenance to resume normal usage as soon as possible.
FAQ
Phenomenon | Please check | How to solve | |||
| No water output | Is water supply failed or water pressure too low? | Make check | ||
| Is water exit blocked? Is hot water valve opened? | Check and clear | |||
|
|
| |||
Cold |
| Heating indicator is on | Heater breakdown | Contact the maintenance | |
water |
|
| Is the power switched on? | Switch on the power | |
output |
| Heating indicator is off | |||
|
|
| |||
only |
|
| Is there temperature regulator breakdown? | Contact the maintenance | |
The heating indicator keeps on | The set water temperature is not reached yet | Continue heating | |||
Is there temperature regulator breakdown? | Contact the maintenance | ||||
|
|
| |||
Unstable quantity and temperature | Is the tap water input pressure stable? | Make check | |||
with water output |
|
|
Packing List
Name | Electric | Safety | Expansion Gasket | User's | ||
water | manual | |||||
| valve | bolt |
| |||
| heater |
|
| |||
|
|
|
|
| ||
Quantity | 1 | 1 | 2 | 4 | 1 | |
|
|
|
|
|
|
6