Usage
After installation, as there's no water inside the tank, please be sure to open the water inlet valve and any of water exit. When the tank is filled with water and the water exit keeps discharging water, close the valve. Check if there's water leakage at each joint. Plug the power plug. In usage, be sure to open the cold water valve before the hot water valve to avoid scalding .You can turn the handle of the mixing valve upward to the left then pull the handle of the safety valve to discharge the water.
Switch on the power. The heating indicator is on. The water heater starts operating. When the water temperature reaches 60
, the heating indicator is off. The water heater will stop heating and enters heat preservation mode.
If the water temperature drops to certain degree, the red indicator will light on again to continue heating. It will circulate like that to guarantee the continuous hot water supply.
Attention
This product requires power supply with 220V
, 50Hz.
The max heating temperature is 60
, not drinkable.
Reliable earthing is requested. Earthing wire shall be separated from neutral wire strictly. To avoid accident, the positions of the live wire and earthing wire can not be replaced.(See to Figure 5.)
Before Usage
¡ÂDear users,
Thanks for choosing Haier water heater product.
Haier products have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly. Please retain it for future reference.
The international star service of Haier Group will always accompany you. No matter what kind of problems you meet in usage, please contact with the local after
The water heater you purchased may not fully comply with the figure in the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom.
Features
1.Safely:
2. Durability:
Full plastic shell, elegant and durable;
Enamel tank, with more reliable quality and longer operation life.
3. Multi- usage:
Enclosed structure, capable of supplying multiple places;
Suitable for family , enterprise, catering, beauty service etc. on hot water Supply.
4. Nice molding,
Arc appearance, appealing design, dapper and elegant.
5. Convenience:
Earthing wire
Earthing wire
Live wire
Earthing wire
(Figure 5)
60
thermostatic heating. It will stop heating when the temperature Reaches 60
.
Live wire | Live wire |
Neutral wire |
Live wire
Earthing wire Neutral wire
Parameters
5
Rated voltage:220V~50Hz | Dimension(See to Figure 1) |
Power: 1200W | Weight: (See to Figure 1) |
Rated pressure: 0.75MPa | Volume: (See to Figure 1) |
Waterproof grade: antisplash( ) | Tap water pressure: no less than 0.05MPa |
| 2 |
