English

Leveling the Washer

Your washer has 4 adjustable levelfing legs that fis located on the front rfight corner. After properly placing your washer in its final location, you must level the washer.

Warning! An "off-balance" washer will not function properly and can stop. Using a level is best practice.

Loosen the adjustable outer and larger ring of the fixed foot. The leveling leg can be adjusted by turning the center foot counter-clockwise to raise the foot and clockwise to lower the washer. Once the foot is at the right height, then lock that position using the outer and larger ring of the fixed foot.

Note: If the washer is inclined more than 2˚, the machine will not operate.

Caster Option (when supplied or purchased)

This washer can convert from fixed feet to casters for mobility and portability. The best time to change from fixed feet to casters is when installing the bottom panel.

Unscrew and remove the fixed feet.

Screw each of the 4 casters to the bottom base by hand first, then use a wrench to secure the caster's locking bolt to the washer body.

Locking caster;

Lift tab DOWN to lock and UP to unlock

Leveling leg

HigherLower

Leveling leg

12

Page 13
Image 13
Haier Haier user manual Leveling the Washer