Trouble shooting
The following circumstances do not constitute problems. Do not contact the maintenance service until the problem has been confirmed.
Problem | Possible Cause | ||
|
|
| |
| Poor connection to power supply | ||
The washing machine fails to | Power failure | ||
operate | Door is not properly closed | ||
| Machine has not been switched on | ||
|
|
| |
| Water is not turned on | ||
| Water pressure is less than 0.05MPa | ||
Washing machine does not fill | The inlet hose is kinked | ||
with water | Water supply failure | ||
| The program knob is not properly set | ||
| The door is not properly closed | ||
|
|
| |
The water supply and | Check that the height of the water hose is below | ||
drainage do not stop | 80cm | ||
|
|
| |
Drainage failure | Drainage hose is blocked | ||
Drainage hose end is over 100cm above the | |||
| |||
| floor level | ||
Strong vibration during spin
Some packing fixing bolts removed Washing machine on a uneven surface
Operation stops before comple- tion of the wash cycle
Water or electricity failure
Excessive foam in the drum
The detergent is not a low foam type Excessive detergent has been used
14
