TROUBLESHOOTING POINTS

PROBLEM

 

CAUSE

 

CORRECTION

 

 

 

 

 

Will not start

1.

Out of fuel.

1.

Fill fuel tank.

 

2.

Engine not “CHOKED” properly.

2.

See “TO START ENGINE” in the Operation section.

 

3.

Engine flooded.

3.

Wait several minutes before attempting to start.

 

4.

Dirty air cleaner.

4.

Clean or replace air cleaner cartridge.

 

5.

Water in fuel.

5.

Empty fuel tank and carburetor, and refill tank with

 

 

 

 

fresh gasoline.

 

6.

Clogged fuel tank.

6.

Remove fuel tank and clean.

 

7.

Loose spark plug wire.

7.

Make sure spark plug wire is seated properly on

 

 

 

 

plug.

 

8.

Bad spark plug or improper gap.

8.

Replace spark plug or adjust gap.

 

9.

Carburetor out of adjustment.

9.

Make necessary adjustments.

 

 

 

 

 

Hard to start

1.

Throttle control not set properly.

1.

Place throttle control in “FAST” position.

 

2.

Dirty air cleaner.

2.

Clean or replace air cleaner cartridge.

 

3.

Bad spark plug or improper gap.

3.

Replace spark plug or adjust gap.

 

4.

Stale or dirty fuel.

4.

Empty fuel tank and refill with fresh gasoline.

 

5.

Loose spark plug wire.

5.

Make sure spark plug wire is seated properly on

 

 

 

 

plug.

 

6.

Carburetor out of adjustment.

6.

Make necessary adjustments.

 

 

 

 

 

Loss of power

1.

Engine is overloaded.

1.

Set depth stake and wheels for shallower tilling.

 

2.

Dirty air cleaner.

2.

Clean or replace air cleaner cartridge.

 

3.

Low oil level/dirty oil.

3.

Check oil level/change oil.

 

4.

Faulty spark plug.

4.

Clean and regap or change spark plug.

 

5.

Oil in fuel.

5.

Empty and clean fuel tank and refill, and clean

 

 

 

 

carburetor.

 

6.

Stale or dirty fuel.

6.

Empty fuel tank and refill with fresh gasoline.

 

7.

Water in fuel.

7.

Empty fuel tank and carburetor, and refill tank with

 

 

 

 

fresh gasoline.

 

8.

Clogged fuel tank.

8.

Remove fuel tank and clean.

 

9.

Spark plug wire loose.

9.

Connect and tighten spark plug wire.

 

10.

Dirty engine air screen.

10.

Clean engine air screen.

 

11.

Dirty/clogged muffler.

11.

Clean/replace muffler.

 

12.

Carburetor out of adjustment.

12.

Make necessary adjustments.

 

13.

Poor compression.

13.

Contact an authorized service center/department.

 

 

 

 

 

Engine overheats

1.

Low oil level/dirty oil.

1.

Check oil level/change oil.

 

2.

Dirty engine air screen.

2.

Clean engine air screen.

 

3.

Dirty engine.

3.

Clean cylinder fins, air screen, muffler area.

 

4.

Partially plugged muffler.

4.

Remove and clean muffler.

 

5.

Improper carburetor adjustment.

5.

Adjust carburetor to richer position.

 

 

 

 

 

Excessive bounce/

1.

Ground too dry and hard.

1.

Moisten ground or wait for more favorable soil

difficult handling

 

 

 

conditions.

 

2.

Wheels and depth stake incorrectly adjusted.

2.

Adjust wheels and depth stake.

 

 

 

 

 

Soil balls up or clumps

1.

Ground too wet.

1.

Wait for more favorable soil conditions.

 

 

 

 

 

Engine runs but tiller

1.

Tine control is not engaged.

1.

Engage tine control.

won’t move

2.

V-belt not correctly adjusted.

2.

Inspect/adjust V-belt.

 

3.

V-belt is off pulley(s).

3.

Inspect V-belt.

 

 

 

 

 

Engine runs but labors

1.

Tilling too deep.

1.

Set depth stake for shallower tilling.

when tilling

2.

Throttle control not properly adjusted.

2.

Check throttle control setting.

 

3.

Carburetor out of adjustment.

3.

Make necessary adjustments.

 

 

 

 

 

16

Page 15 Page 17
Page 16
Image 16
Poulan PPFT55 owner manual Troubleshooting Points
Page 15 Page 17

PPFT55 specifications

The Poulan PPFT55 is a powerful, user-friendly trimmer designed for homeowners and landscape enthusiasts looking to maintain their lawns and gardens effectively. This versatile tool is built to tackle a variety of cutting tasks, making it an indispensable addition to any outdoor equipment arsenal.

One of the standout features of the Poulan PPFT55 is its robust 25cc two-stroke engine. This engine provides ample power for tackling tough weeds and thick grass while remaining lightweight and easy to handle. The two-stroke design ensures efficient fuel combustion and contributes to lower emissions, making it environmentally friendly. With a maximum power output of 1 HP, users can expect excellent performance without compromising on ease of use.

The PPFT55 is equipped with a bump feed head that simplifies the process of line replacement. This feature allows users to easily extend the cutting line by simply tapping the head against the ground while operating the trimmer, eliminating the hassle of manual line feeding. The cutting width of 18 inches provides generous coverage, allowing users to complete their trimming tasks quickly and efficiently.

Another significant aspect of the Poulan PPFT55 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended periods of use. The adjustable curved shaft further enhances ergonomics, allowing users to customize the trimmer’s height for maximum comfort.

Additionally, the trimmer features an easy-start technology that reduces the effort needed to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start systems. The PPFT55 is also equipped with a reliable primer bulb and choke for smooth starts, even in colder conditions.

Safety is also a priority with the Poulan PPFT55. The machine includes a protective shield to keep debris at bay while trimming, providing added peace of mind during operation.

In conclusion, the Poulan PPFT55 is a highly effective and convenient trimmer that combines a powerful engine, user-friendly features, and thoughtful design elements. Whether you are a novice gardener or a seasoned pro, this trimmer is an excellent choice for maintaining your outdoor spaces, ensuring that your lawn and garden always look their best.
Top Page Image Contents