STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

•Clean entire tiller (See “CLEANING”in the Maintenance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT:IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent.

•Use fresh fuel next season.

NOTE: Fuel stablizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stablizer container. Run engine at least 10 minutes after adding stablizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug.

•Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly several times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER TILLER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

15

Page 14 Page 16
Page 15
Image 15
Poulan PPFT55 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders
Page 14 Page 16

PPFT55 specifications

The Poulan PPFT55 is a powerful, user-friendly trimmer designed for homeowners and landscape enthusiasts looking to maintain their lawns and gardens effectively. This versatile tool is built to tackle a variety of cutting tasks, making it an indispensable addition to any outdoor equipment arsenal.

One of the standout features of the Poulan PPFT55 is its robust 25cc two-stroke engine. This engine provides ample power for tackling tough weeds and thick grass while remaining lightweight and easy to handle. The two-stroke design ensures efficient fuel combustion and contributes to lower emissions, making it environmentally friendly. With a maximum power output of 1 HP, users can expect excellent performance without compromising on ease of use.

The PPFT55 is equipped with a bump feed head that simplifies the process of line replacement. This feature allows users to easily extend the cutting line by simply tapping the head against the ground while operating the trimmer, eliminating the hassle of manual line feeding. The cutting width of 18 inches provides generous coverage, allowing users to complete their trimming tasks quickly and efficiently.

Another significant aspect of the Poulan PPFT55 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended periods of use. The adjustable curved shaft further enhances ergonomics, allowing users to customize the trimmer’s height for maximum comfort.

Additionally, the trimmer features an easy-start technology that reduces the effort needed to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start systems. The PPFT55 is also equipped with a reliable primer bulb and choke for smooth starts, even in colder conditions.

Safety is also a priority with the Poulan PPFT55. The machine includes a protective shield to keep debris at bay while trimming, providing added peace of mind during operation.

In conclusion, the Poulan PPFT55 is a highly effective and convenient trimmer that combines a powerful engine, user-friendly features, and thoughtful design elements. Whether you are a novice gardener or a seasoned pro, this trimmer is an excellent choice for maintaining your outdoor spaces, ensuring that your lawn and garden always look their best.
Top Page Image Contents