MAINTENANCE

MUFFLER

Do not operate tiller without muffler. Do not tamper with exhaust system.Damaged mufflers or spark arresters could create a fire hazard. Inspect periodically and replace if necessary. If your engine is equipped with a spark arrester screen assembly, remove every 50 hours for cleaning and inspection. Replace if damaged.

SPARK PLUG

Replace spark plugs at the beginning of each tilling sea- son or after every 50 hours of use, whichever comes first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” on page 3 of this manual.

CLEANING

Do not clean your tiller when the engine and transmission are hot. We do not recommend using pressurized water (garden hose, etc.) to clean your unit unless the gasket area around the transmission and the engine muffler, air filter and carburetor are covered to keep water out. Water in engine will shorten the useful life of your tiller.

•Clean engine, wheels, finish, etc. of all foreign mat- ter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

TRANSMISSION

Your transmission is sealed and will not require lubrication unless serviced.

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 15)

Factory assembly has provided lowest handle height. Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•If a higher handle height is desired, loosen the four nuts securing handle panel to engine brackets.

•Slide handle panel to desired location.

•Tighten the four nuts securely.

ENGINE BRACKETS

HANDLE

PANEL

NUTS (ALSO 2

ON LEFT SIDE

OF TILLER)

FIG. 15

TINE ARRANGEMENT

NORMAL TILLING - 26" PATH (See Fig. 16)

•Assemble holes “A” in tine hubs to holes “B” in tine shaft.

CLEVIS

OUTER

PIN

TINE

A

A

 

B

B

tine_4

 

HAIRPIN CLIP

INNER TINE

 

FIG. 16

MID-WIDTH TILLING - 24" PATH (See Fig. 17)

•Assemble holes “A” in tine hubs to holes “C” in tine shaft.

A

C

C

A

tine_5

 

 

 

FIG. 17

Your outer tines can be assembled in several different ways to suit your tilling or cultivating needs.

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

12

Page 11 Page 13
Page 12
Image 12
Poulan PPFT55 owner manual Service and Adjustments, Cleaning, Tiller
Page 11 Page 13

PPFT55 specifications

The Poulan PPFT55 is a powerful, user-friendly trimmer designed for homeowners and landscape enthusiasts looking to maintain their lawns and gardens effectively. This versatile tool is built to tackle a variety of cutting tasks, making it an indispensable addition to any outdoor equipment arsenal.

One of the standout features of the Poulan PPFT55 is its robust 25cc two-stroke engine. This engine provides ample power for tackling tough weeds and thick grass while remaining lightweight and easy to handle. The two-stroke design ensures efficient fuel combustion and contributes to lower emissions, making it environmentally friendly. With a maximum power output of 1 HP, users can expect excellent performance without compromising on ease of use.

The PPFT55 is equipped with a bump feed head that simplifies the process of line replacement. This feature allows users to easily extend the cutting line by simply tapping the head against the ground while operating the trimmer, eliminating the hassle of manual line feeding. The cutting width of 18 inches provides generous coverage, allowing users to complete their trimming tasks quickly and efficiently.

Another significant aspect of the Poulan PPFT55 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended periods of use. The adjustable curved shaft further enhances ergonomics, allowing users to customize the trimmer’s height for maximum comfort.

Additionally, the trimmer features an easy-start technology that reduces the effort needed to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start systems. The PPFT55 is also equipped with a reliable primer bulb and choke for smooth starts, even in colder conditions.

Safety is also a priority with the Poulan PPFT55. The machine includes a protective shield to keep debris at bay while trimming, providing added peace of mind during operation.

In conclusion, the Poulan PPFT55 is a highly effective and convenient trimmer that combines a powerful engine, user-friendly features, and thoughtful design elements. Whether you are a novice gardener or a seasoned pro, this trimmer is an excellent choice for maintaining your outdoor spaces, ensuring that your lawn and garden always look their best.
Top Page Image Contents