Installation
1.Take out all the packing. if there is a safe film over the oven, tear it off before Use. Check carefully for damage. if any, immediately notify dealer or send to the manufacturer’s service center.
2.Microwave ovens must be placed under dry and
3.to ensure sufficient ventilation, the distance of the back of microwave to the wall should be at least 10 cm, the side to the wall should be at least 5 cm, the free distance above the top surface at least 20 cm.
4.the position of the oven shall be such that it is far from the TV, Radio or antenna as picture disturbance
Or noise may occur.
5.the appliance must be positioned so that the plug is accessible, and must ensure a good grounding in case leakage, ground loop can be formed to avoid electric shock.
6.The microwave oven must be operated with the decorative door closed.
7.The microwave oven shall not be placed in a cabinet
8.The back of the oven must be placed against a wall
9.As there is manufacturing residue or oil remained on the oven cavity or heat element, it usually would smell the odor, even a slight smoke, It is normal case and would not occur after several times use, keep the door or window open to ensure good ventilation. So it is strongly recommended to set the oven to grill mode and operate dry several times.
10.To keep the microwave oven at a distance from the wall, it is necessary to install a distance limiter
Hole A
Clasp B | Clasp C |
Hole A
Clasp A
Push Distance Limiter
in this direction
2
| 1 |
Secure Clasp A to Hole A | Distance Limiter |
|
1)Push Distance Limiter in the given direction; 2)Make sure Clasp A is secured to Hole A;
3)Insert Clasp B and Clasp C into their respective square holes .
Operating dry should only be conducted in the grill mode, it should NOT be conducted at combination mode
1
